Question about 1990 Subaru Legacy

1 Answer

92 subaru legacy my hazards just just came on and won't turn off.

My hazards came on out of the blue and I can't get them to turn off. I pulled the fuze and they went off but doing so also caused my blinkers to stop working and the automatic seatbelts quit working also. Any ideas? It's a 92 subaru legacy

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 97 Answers

That usually happens if the battery goes all the way dead or disconnected & reconnected. If that's the case you'll usually hear a clicking sound under the dash also. it's part of the security system & needs to be reset. You can reset the system by either using the remote if you have one or most have a reset button under the left hand lower side of the driver side dash, turn the ign. on, eng. off & press the button for at least one second.

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

After using my flashers in my 1992 Subaru Legacy (no security system) they would not turn off. I pulled the fuse and now my turn signals won't work. Help


The hazard switch is either broken or the contacts inside are welded together. The real fix is to replace the hazard switch. You are not alone with this problem, see link attached and read the whole thread.
found this helpful answer from subaru mechanic on JustAnswer com

Feb 03, 2015 | 1992 Subaru Legacy

1 Answer

I have a 92 subaru legacy and the park lights stay on when the ignition is off, and the key is hard to turn.


Your ignition switch is faulty and needs replacement this is why the power stays on to power up the lights!

Oct 08, 2010 | 1993 Subaru Legacy

1 Answer

92 subaru legacy wagon engine surges while


pay close attention to the fuel filter as this is a common symptom and sign of blockage and poor fuel delivery....replace fuel filter

Sep 15, 2009 | 1992 Subaru Legacy

1 Answer

Like to know how to set timing on a 92 suberu. all


The '92 Subaru Legacy uses a distributorless ignition system. No adjustment is possible/necessary. The computer adjusts the timing continuously.

You can check the timing if you have a timing light. The spec for engines with a turbo charger is 15 degrees plus or minus 8 degrees at 700 RPM. Non-turbo engines are 20 degrees plus or minus 8 degrees at 700 RPM.

Jul 19, 2009 | 1992 Subaru Legacy

1 Answer

Can't find the hazard flasher for '93 Subaru Legacy!


they are usually one and the same box fuse...you might try putting in a new one

Mar 01, 2009 | 1997 Subaru Outback

3 Answers

92 Subaru Legacy Power Windows Don't Work


I have a 92 that did the same. After checking fuses and the relay(located under drivers seat) I discovered that the power windows control module on drivers door was bad. Went to a salvage and bought a used for $40, pulled the door panel, unscrewed and unplugged the old one, put in the used one and everything worked fine. About a week later, the passenger side motor went out and replaced that with a used power window motor. All windows now work fine.

Jan 17, 2009 | 1992 Subaru Legacy

1 Answer

Legacy gt 92 single turbo clutch adjustment


Only clutch adjustment is at the pedal as they are hydraulic. Clutch may be worn, cheers

Aug 01, 2008 | 1992 Subaru Legacy

Not finding what you are looking for?
1990 Subaru Legacy Logo

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...