How do you replace the oil pressure sensor on the 95 VW passat VR6? I have a leak on the left one on the passenger side. The sensors are directly above the oil filter conected to the filter housing. It looks pretty tight for any wrenches and was wondering how hard it might be to fix. Any help would be appreciated. Thanks Arthor
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
CHECK ENGINE OIL LEVEL SOUND LIKE LOW OIL LEVEL.CHANGE OIL IF IT HAS BEEN OVER 3000 MILES OR OIL LOOKS DIRTY CHANGE IT.IF OIL CHANGE DONT HELP HAVE OIL PRESSURE CHECK TO SEE IF OIL PUMP GOING BAD OR YOU HAVE A FAULTY OIL PRESSURE GAUGE.
I would check the oil pressure sensor and the oil pump itself. You can take the sensor out and use a mechanical gauge to check the oil pressure. If the oil pressure is within specs, you need a new sensor, if not, you need a new pump.
Adjust or replace the shiftlock sensor. It unlocks the shifting mechanism when you put your foot on the brake.
If there is an ignition problem, the tumbler will need replacement soon. This can be caused by an overloaded keychain. Best to do it now while it still is working, then have it fail and leave you stranded.