Question about 1991 Peugeot 405

2 Answers

My car heating does not work & I need a fuse box diagram

I have a 1991 Peugeot 405 Estate. My heating does not work. The blower works and i think the matrix still gets hot. A few months ago i found that the blower controls work via a manual cabel and the heating by electric. Since then the radio and cigaret lighter has stopped working. Do you think its just some fuses that may have gone or what else would stop the heat from coming through? If it is the fuses - do you have a diagram because i haven't got one?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My motor hasn't blown

Posted on Dec 10, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 128 Answers

I do not have a diagram for the fuse layout however
looking at your fuse box pull ONE fuse out at a time and check that they are not blown they should have a link in the plastic if there is no link then it is blown most cars have the radio and cigarette lighter linked together and this is normally about 10-15 amps.
there is also a fuse for you heater controls however this normally stops the fan "blower" from operating if your temperature control is electric then the motor that moves the arm to mix cool and hot air flow may be damaged
hope this has helped

Posted on Dec 27, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1998 peugeot306 blocked heater matrix how to unblock

You can take the cold inlet pipe off at the bulkhead and attach a hose pipe to blow it through, make sure the water has somewhere to come out, If this does not work then most likely you will have to replace the matrix.

Feb 07, 2010 | 1991 Peugeot 405

2 Answers

1996 peugeot 405 1.9 td estate heater blower works sometimes. usualy now works when I have given the blower body a knock

Check the power connection, make sure it is seated fully. If it is, you may want to start thinking about replacing the blower

Feb 03, 2010 | Peugeot 405 Cars & Trucks

1 Answer

My heater blower has stoped working on my peageot

There is a 4" long Green ceramic resistor by the blower motor, prone to fail, I think Valeo does them on the aftermarket.

Nov 19, 2009 | 2005 Peugeot 405

1 Answer

Van has new rad on all pipes are hot including the pipes into the bulkhead although the out let pipe is warm, temp gauge in dash working normally, have flushed out the system for blocks everything coming...

YOUR problem could be either the air valve that opens the heater from hot to cold and is worked by vacuum and if the pipe is split then you wont get the heat etc.
also change the thermostat and open the heater to hot before bleeding the coolant system..

Oct 07, 2009 | 1991 Peugeot 405

1 Answer

2003 Peugot 406 Hdi Estate. Cutting out whilst driving and at idle (poss when wife adjusts driver seat). Happened a few months ago after service - suspected air in system. Wife noticed air in fuel pipe...

renew the flexible hose connections at the tank end if fitted and not a plastic pipe going straight to sender unit .Sucking in air problem is one of THEM jobs .a right pain to find 99%of the time .but any flexible rubber pipes can and do go porous with age

Sep 24, 2009 | 2005 Peugeot 405

3 Answers

Heater matrix has gone on my 405 diesel bypassed it

sounds like your inner cooler is leaking and is causing an air lock within your coolant system. Sorry to hear this, changing this part is time consuming. Hope this helps you.

Jul 26, 2009 | 1991 Peugeot 405

1 Answer

Indicaters on my peugeot 106xn 1994 work only when cold!!!

i think there might be water in the rear lights or corroded, i would start there 1st.

Mar 11, 2009 | 1991 Peugeot 405

1 Answer

Peugeot 106 blown lights

u changed the bulbs? blower, when not working try and tap it, i think it will work as i think your car is high milleage and brushes are worn in the blower, it is under glove box.

Feb 28, 2009 | 2005 Peugeot 405

1 Answer

Where to find owners manual (or any other book) for citroen xsara 1.9d estate to download for free?

try direct connect p2p file sharing ,programme can be found at sourceforge,net

Dec 31, 2008 | 1991 Peugeot 405

Not finding what you are looking for?
1991 Peugeot 405 Logo

817 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Wahs Team

Level 2 Expert

205 Answers


Level 3 Expert

70374 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides