Question about 2008 Toyota Camry

1 Answer

Wife says that the garage tore off the passenger side mirror

How does the access cover on the inside of the door come off? I am replacing the mirror myself. It doesn't look difficult.

Posted by on

  • Toyota Ed May 11, 2010

    Before you take off the door panel, pull off the triangular piece of plastic that is directly behind the mirror, on the inside of the door. Start at the top, pull it back, and then release the bottom.

    Advise me what you see.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 716 Answers

Pull On Black Piece Inside Door Then Remove The Wiring Harness.
Then Remove The 3 10mm Bolts And Replace.

Posted on Jan 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace rear vision mirror passenger side mazda 323 astina 2002


on the inside of the door above the door panel hinge side is a plastic cover almost triangle shape use flat screw driver to carefully pry off and the mirror mounting bolts will then be accessable

Jul 23, 2016 | Mazda 323 Cars & Trucks

1 Answer

2006 ford fusion


on the inside of the door there should be a plastic cover the same shape as the unit that you can pry off (very slowly) and it may have some clips that you can pry off. when you remove the cover the three posts should be exposed and just remove the nuts and the rest is easy.................as far as your kid goes...........your on your own...........

Feb 13, 2010 | 2006 Ford Fusion

1 Answer

Removing passenger door panel


There is a screw behind the lock rod. Lift door panel straight up to remove

Jun 13, 2009 | 2003 GMC Yukon XL

1 Answer

Remove passenger side mirror. Ineed to replace a broken passenger side mirror. Do I need to remove the entire door panel to access the scriews holding the mirror and to access to electrical connection?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jun 11, 2009 | 2007 Toyota 4Runner

1 Answer

2008 Ford Fusion Wing Mirror Replacement


I checked Ford Focus mirror replacement and it seems to be the same. This is for the manual, unheated mirror.

Remove the mirror cover inside the door - slide a screwdriver behind the cover and pry loose carefully.

Remove the single 10mm bolt and the mirror comes free.
NB. Do not drop the bolt into the door.

Apr 02, 2009 | 2008 Ford Fusion

1 Answer

My wife backed into the garage and knocked the passenger side mirror off. Does anyone know how I can fix it? It looks like some of the little knobs that latch it broke.


If there is no damage to the door itself the mirror replacement is fairly easy on this model. Remove the inside plastic trim panel,it just snaps on. Disconnect the electrical connector remove the bolt in the center and there will be a screw toward the front of the door,remove it then remove the mirror.
Here is a pic of the bolt and screw.
http://i253.photobucket.com/albums/hh43/chuck943/focusmirror.gif

If it has a painted cover on the outside of the mirror to match the color of the vehicle then that would have to be painted to match unless your old one did not suffer any damage then you could just swap it.It just snaps on also, and it may or may not come with a new mirror so I would ask when ordering it.

Mar 10, 2009 | 2005 Ford Focus

2 Answers

I need to replace passenger side mirror on 97 ford expedition


Both above answers are not right... I just replaced the Pass side power mirror assembly on my 97 Expedition. No heat, no directional.
The inside door panel must come off.
1. pry off interior triangular plastic trim piece inside of door at mirror area. Remove door panel screw at this area.
2. Pry off power window switch panel and remove door panel screw at this area.
3.Remove interior door light cover and remove screw at this area.
4. Remove plastic cover at door handle.
5. The interior door panel can now be lifted up to release it from it's fasteners.
6. Disconnect light and push power window switch assembly through the door panel and it can be set aside.
7. Disconnect mirror power at coupler.
8 Loosen three mirror mounting screws with 7/16 socket. DO NOT unscrew completely.. the will fall down the door cavity. Use a round magnet on holder to remove the screws completely.
9.Thread electrical connection into door panel and install mirror.
10. Smile when mirror works and drink a beer!
rayman

Dec 27, 2008 | 1997 Ford Expedition

2 Answers

How do I replace broken 2002 buick century passenger side mirror?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Oct 09, 2008 | 2002 Buick Century

2 Answers

Central locking keeps locking the car. Unable to open drivers side door


Hello, we have a 2003 Kia Rio- problem as above- unlocking and then locking- only way in and out through passenger door.
This is what I have done and everything is back to normal- I hope it works for you.
1 Remove 25AMP fuse that controls door central locking from main box under the bonnet.
(AT this stage my passenger door opens- drivers side does not, the mechanism won't fully rotate)
2, Spray key with WD40 (or similar moisture repellent lubricant). Gently turn key to loosen mechanism- Partly remove key and spray lubricant into lock, have fun locking and unlocking!
3, Replace 25 amp fuse
4, Write yourself a cheque for garage labour and parts and wife brownie points!

Aug 09, 2008 | Kia Rio Cars & Trucks

Not finding what you are looking for?
2008 Toyota Camry Logo

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...