Question about 2004 Lincoln Navigator

1 Answer

I can't move my gearshift - 2004 Lincoln Navigator

Posted by on

  • genemi Mar 17, 2009

    2003 Envoy XL, can't move out of gear. Brake petal USED to make a clicking sound when pushed, but no longer does. Any suggestions??

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Lincoln Master
  • 63,953 Answers

THIS IS CAUSED BY EITHER A SHORTED BRAKE LIGHT CIRCUIT WITH A RESULTING BLOWN FUSE, OR MORE LIKELY A DEFECTIVE BRAKE LIGHT SWITCH, THE SYSTEM HAS WHAT IS CALLED A PART LOCK OUT, THIS SYSTEM HAS TO SENSE THE BRAKE PEDAL IS PRESSED BEFORE U CAN SHIFT OUT OF PARK, IT DOES THIS BY USING THE 12 VOLT SIGNAL FROM THE BRAKE LIGHT SWITCH TO RELEASE A SMALL SOLENOID ON THE TOP OF THE STEERING COLUMN.

Posted on Dec 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't it go into park or neutral?


If the gearshift is stiff to move possibly need a gearshift cable.

Dec 15, 2015 | Plymouth Breeze Cars & Trucks

1 Answer

How can I can get the gear shift leaver to move from park position


On the facia panel of your gearshift there is a small black cover located at the rear of the panel ,on some models there is a hole to the right of the gearshift, forward of the facia panel . Put a thin screw driver down this hole , you will need to feel around and locate the button/lever, it is sprung loaded and can be pushed down with the screw driver . It will release the gearshift but it is advisable to see technician as mine was caused from faulty wires on trailer and had blew a fuse to .

Mar 14, 2015 | 2007 SsangYong Rexton 270

1 Answer

The car starts, but the gearshift wont move from park


Usually a problem with the brake switch or the solenoid that locks the shifter in park.
That circuit would need to be tested.

Oct 02, 2012 | 2005 Chrysler Pacifica

1 Answer

Gearshift won't move


The brake pedal and drive selector (gearshift?) are interlocked to prevent shifting into drive without a foot on the brake. You may have to really stop on the brake pedal with the engine running to free up the lever

Sep 17, 2012 | 1994 Dodge Caravan

1 Answer

My l-series 2001 saturn is stuck in Park gear


i dont know anything about cars. give me other questions

Aug 11, 2012 | 2001 Saturn SL

1 Answer

Gearshift on 2003 outlander


You move the selector to the gear that you want and it engages that gear.

Apr 22, 2012 | Cars & Trucks

1 Answer

Ignition appears to be stuck...please help..


Check your gearshift position. There are interlocks for the Ignition both with the Brake pedal, the steering wheel, and the gearshift. With your gearshift, if you have an Automatic, there is a trigger to press so the Shifter will move. If the trigger is stuck into the fixture the Key will not come out or the Ignition switch may not turn.

With the steering wheel, sometimes there is pressure from how the front tires where left when the car was parked. The steering assembly is pinched and must be moved to the side that is jammed so the Ignition Key will turn.

The Brake pedal, there are switches under the dash at the top of the brake pedal lever. These must align to let the gearshift move which in turn may free the Keyswitch. They get hit by feet frequently and may need to be replaced or repositioned.

Make sure you are using the right set of Keys and it is possible for the Ignition switch to break inside.

I hope this helps you.

Feb 04, 2011 | Ford Windstar Cars & Trucks

1 Answer

'98 Escort transmission woes.


You will have to lubricate your shift mechanism. Shift Linkage —Transmission Gearshift Rod and Clevis Removal
  1. Raise and support the vehicle;
  1. Remove the heat shield front (RH) bolt.
  2. Remove the heat shield middle (RH)& (LH) bolts.
  3. Remove the heat shield middle (LH) bolt.
  4. Remove the heat shield rear bolt.
  5. Remove the transmission gearshift rod-to-shift lever nut.
  6. 2ac81cc.gif
    7.Remove the transmission gearshift lever clamp bolt and the transmission gearshift rod and clevis .c37044a.gif
8.Remove the transmission gearshift rod nut.

7b10680.gif 9. Remove the transmission gearshift bolt from the input shift shaft and remove the transmission gearshift rod and clevis.

fe53fee.gif
You may not have to remove the linkage but make sure to lubricate all the moving parts until they are freely moving. Although it is probably easier if the linkage is removed and work done on a bench or something.
Drain Procedure
  1. Raise and support the vehicle;
  2. Remove the drain plug and drain the fluid. 8af8970.gif
  3. NOTE: Use a new gasket on the drain plug.
    Install the drain plug.
  4. Tighten plug to 29-40 ft/lbs
Fill Procedure
  1. Park the vehicle on level ground and apply the parking brake.
  1. Disconnect the vehicle speed sensor (VSS) electrical connector.
  2. 5a4c8e7.gif
    3.Remove the bolt and the VSS.
    0c09628.gif 4. Place a funnel into the VSS hole.

    2875e67.gif 5. Add the specified transaxle fluid until the full level on the VSS is reached.

    81d0b65.gif OIL LEVEL BETWEEN ARROWS^^^^^ You will have to insert the vss to verify the level is between the arrows as indicated. (use it like a dipstick)
    6. When full...(a)Install the VSS and the bolt. (b) Connect the VSS electrical connector. IO hope this helps you. Please give feedback if you want to. Wfservices

    May 09, 2010 | 1998 Ford Escort

    1 Answer

    No rear lights inc brake lights no nearside front side light


    I HAD THIS PROBLEM WITH MY JAG ITS A FUSE OR A RELAY PHONE CHRIS AND ASK HIM HE WILL PUT YOU RIGHT 07718759675 / 01914874717

    Feb 22, 2009 | 1994 Jaguar XJ6

    Not finding what you are looking for?
    2004 Lincoln Navigator Logo

    286 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lincoln Experts

    yadayada
    yadayada

    Level 3 Expert

    63801 Answers

    Fordexpert

    Level 3 Expert

    5331 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21990 Answers

    Are you a Lincoln Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...