Do you have to take the front bumper off to replace the fog light or ??? Also, on my vehicle the light still works its the outside glass thats broken so do you need to buy the whole light assembly or can you just replace the cover?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Its all attached by clips and screws.Nothing much special.But its all about the procedure.Dont forget the mark the position , location of the screws you remove, so while refitting you don't face any problemTo replace fog light bulb or to replace replace complete fog light unit, click this link below:---
This will help.Thanks.Helpmech.
REPLACE FRONT BUMPER YOU SAFELY RAISE SUPPORT VECHICLE ON JACK STANDS.WORKING UNDERNEATH VECHICLE YOU DISCONNECT FOG LIGHT ELECTRICAL CONNECTIONS IF EQUIPPED. WORKING FROM BACK OF THE BUMPER REMOVE ALL BOLTS THATS HOLDING BUMPER TO FRAME RAIL THEN YOU CAN REMOVE THE BUMPER.
The fog lamp assemblies can be removed by getting underneath the front bumper and on top of the fog lamp assemblies you will find the metal mounting bracket. The bracket attaches to the vehicle with 3 small bolts that are 8-10mm (i forgot exactly) that bolt down through the bracket into the front bumper cover above the actual lens itself and can be accessed with a box wrench. I replaced both assemblies in mine in under 1/2 and hour!
You can gain access to the fog light by removing the screw and clip
from the front portion of the fender liner of the wheel well. I believe on that model you
may have to remove the fog light to get to the bulb. It is held in by a
couple bolts through the bumper from the back side.
hi..You will have to access the fog light bulb from below the vehicle.
Remove the plastic clips from the wheel well cover extension that is
below the fog light.once the clips are out and the plastic cover is pull
down,you should be able to see the back of the fog light.you can try
to replace the fog light bulb by removing the two 10mm bolts and slide
the fog light assemble out through the front of the bumper.Turn the cover
of the rear of the fog light and replace light.
try this out..
kindly rate my response..