Question about 1993 Cadillac Fleetwood

1 Answer

Interior lights periodically work right

Where is the interior dome lights switch or command center

Posted by on

  • dmelliot Feb 04, 2009

    I have a 1993 cadillac fleetwood and my interior lights work.... sometimes... I have dash lights but no reading lights, no vanity mirror lights and my fuses are good. Sometimes I open the door and the lights come on but most times they don't. My radio works fine.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try turning the push-pull headlight switch on the dashboard left of the steering wheel

Posted on Dec 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What color are the wires that go from door switch to dome lights on a 2005 mustang v6 conv.


The door switch doesn't go to the dome lights , the switch (door ajar switch ) is an input to the SMJ - smart junction box or body control module take your pick .
Principles of Operation
When the SJB detects a request for lighting, it turns on the interior lamps by supplying power to the lamps. The request for lighting can be an open door signal from a door ajar switch, an interior lighting on command from the instrument panel dimmer switch or an unlock command from a remote keyless entry (RKE) transmitter.
The door ajar switches are hard-wired directly to the SJB. The 2 door ajar switches are normally closed when the doors are closed. The decklid ajar switch is normally closed when the decklid is closed. All door ajar switches receive voltage from the SJB and each has its own ground circuit.
The instrument panel dimmer switch receives a ground signal from the SJB. The instrument panel dimmer switch provides variable resistance for backlighting the instrument cluster and a toggle ON/OFF function for the interior lights.
The RKE receiver is contained inside the SJB. When the SJB receives an unlock request from an RKE transmitter, it unlocks the doors and turns on the interior lamps. There could be DTC'S diagnostic trouble codes stored in the SJB ! You can not access these codes with a OBD2 code reader , need a factory scan tool .
B1319 Driver Door Ajar Circuit Failure Go To Pinpoint Test D . B1327 Passenger Door Ajar Circuit Failure Go To Pinpoint Test D . B2021 Dome Lamp Input Return Circuit Failure Go To Pinpoint Test A . B2550 Dome Lamp Output Circuit Short to Ground Go To Pinpoint Test A . B2554 Dome Lamp Output Circuit Failure Go To Pinpoint Test D . Do you know B-codes -body control .
Your best bet is to take to a ASE certified repair facility or a Ford dealer .

Jan 01, 2016 | 2005 Ford Mustang V6

1 Answer

Interior dome lights not working where is the fuze and how is it marked


Located in under hood fuse/relay center. Owners manual will give fuse locations and identification. Make sure dome light is not turned off by dimmer switch

Jul 10, 2015 | 2015 GMC Savana Cargo

2 Answers

Chevy trailblazer problems


its either a bad door switch,or could be the dome override switch by headlight switch,or your interior light switch is all the way up

May 01, 2014 | 2004 Chevrolet TrailBlazer

1 Answer

2005 Dodge Durango interior dome lights will not shut off


One of the switches on the doors or tailgate are broken. Look at the switches (located on the door or the door pillars) and see if one of them has been broken or stuck. This switch turns lights off when depressed.

Feb 05, 2014 | 2005 Dodge Durango

1 Answer

Interior lights won't shut off


Some vehicles have a twist dashlight control and when it is turned to the extreme position it turns on the interior lights. Other vehicles have a separate switch for interior lights right on the dome light. Yet another type is a dome light with 3 selections that command the dome light to be on fulltime, or to be off fulltime, or the normal door opening triggering the switch.

Provided the problem is not any of the above, you could have a bad doorjam pin switch which is not separating its contacts when the door is closed. I would look at the drivers switch first as it has the most use.

Dec 10, 2013 | 2000 Ford Expedition

1 Answer

Only dome light works when door opened on es300


A switch by the side of the indoor light normally is divided into several gear to feel it when the gear drive DOOR interior lights will be lit up
want know more

Mar 28, 2013 | 2003 Lexus ES 300

1 Answer

2005 chevy suburban- my back-up lights and interior dome lights do not work. All fuses appear intact? Suggestions?


you bcm (body control module is bad) to have the dealer replace it will run you about $400. a quick fix for the reverse light is to splice 2 wires into the wire for the center plug in your trailer wiring. now run a wire up to each reverse light, cut the green wire to each reverse light and **** conect them up. this is a seperate revers feed than the one from the bcm. the dome lights remove the light cover on the second set of interior lights (the one between the drivers seats). the two side bulbs are map lights the center bulb is for the dome lights. run a jumper wire from the right or leftside socket to the center socket. you dome lights will now turn on with just the use of that switch i replaced the back bulbs with led's soo there is no extra amp's being drawn. you could bypass the bcm but i could not find any wiring diagrams for it and i dont know if it can take the added amp's

May 31, 2010 | 2005 Chevrolet Suburban

2 Answers

How to take out only interior light fuse


2000 Lincoln Navigator interior lights won't turn off and now the door ajar light is on as well. How can this be fixed, I tried wd40 as suggested it didn't work HELP!

Feb 28, 2010 | 2002 Lincoln LS

2 Answers

I have a 2010 Acadia, the interior lights do not come on when I open the door. I have pushed the dome light button in and have left the button out still no lights when I open the door. Any suggestions?


Next to the round exterior light switch is a switch that controls the brightness of the interior dome lights. You can push (detent) that button in and it will pop out to make it easier to brighten/dim those lights. The tricky part is that the switch for making the dome lights illuminate when you enter/exit the vehicle is actually the top half of the backplate of the dome brightness switch. It says "dome off" on the upper portion of the backplate. That one inch area - that barely depresses - is actually the switch to make the dome lights work with the door operation. Try pressing it and then opening your door. It should work. Good Luck!

Jan 09, 2010 | 2008 GMC Acadia

2 Answers

2009 ford focus dome light stays on


Are you sure that the thumb wheel switch beside the headlamp switch is not turned all the way up until it clicks?
If it is staying on for 10 minutes this means that the smart junction box is seeing a demand for the interior lights from something like a door ajar switch or the thumb wheel. If it sees that the igntion is in the off position it will turn the lights off after 10 minutes to conserve battery power.
Normal operation is:
The interior lighting delay feature provides temporary illumination of the courtesy lamps after the doors are opened and then closed. The interior lighting delay feature keeps the courtesy lamps on for a period of 25 seconds after all the doors are closed. If during the 25-second delay time the SJB detects that the ignition has been switched out of off, or if the vehicle is locked using the RKE, the courtesy lamp illumination is discontinued

Mar 24, 2009 | 2009 Ford Focus

Not finding what you are looking for?
1993 Cadillac Fleetwood Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...