Question about 1995 Toyota Corolla
To replace all fluid you should first purchase a filter & pan gasket set for about $20. You need a good set of ramps & chocks. Pulll the pan and drain (this is about 1quart). Replace the filter and clean the pan, if necessary with a small amount of kerosene and rinse out with atf. There may be a magnet with a peanut-butter like paste (tranny wear), clean that too and replace. Replace pan being very careful to follow pan tightening sequence & torque. Do not overtighten! Take off ramps. Remove hose from of the trans cooler beneath the radiator leading back to the trans. Have a trans funnel in place in the dipstick filler tube. Start engine in P and have a helper pour in trans fluid at the same rate the fluid is spat out of the hose. This is very critical, do not let it run dry because you are already a quart low from the pan cleaning! the rate is about 15-seconds per quart but you should time how long it takes to fill a quart from the cooler line for best results. stop engine when color of fluid being spat out changes to new fluid. check fluid a couple of times afterwards at different temps to be sure. Good luck. Use synthetic ATF for best results (check the bottle for compliance with manuf)
Posted on Dec 29, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 23, 2014 | 1999 Toyota Corolla
Jun 28, 2011 | 2004 Toyota Corolla
Apr 25, 2011 | 2000 Toyota Corolla
Jan 28, 2011 | 1993 Toyota Corolla
Jul 07, 2010 | 2003 Toyota Corolla
Jan 23, 2010 | 2003 Toyota Sienna
Nov 11, 2008 | 1990 Toyota Corolla
304 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: