Question about 1990 GMC K2500

1 Answer

Need to set timing on 1990 chevy pu 5.7 engine "K" ?

Posted by on

  • ed_connley Dec 11, 2008

    thanks for your time and help.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 98 Answers

Set cylinder 1 to top dead center then set the distributer to the #1 wire contact, snug down the distributor and start the engine, then hit the crank dampener with a timming light while clipped to the #1 spark plug wire and turn the distributor till the timming light is showing 0 on the crank, then tighted it down and timming is set.

Posted on Dec 11, 2008

  • erik mcdonald
    erik mcdonald Dec 11, 2008

    hey no problem bro if you have anyother trouble let me know i'll try to keep checking up onthe site, take care bud.

    Erik
    U.S.Army


×

1 Suggested Answer

san luis
  • 11 Answers

SOURCE: 1990 2500 Chevy PU with stalled engine, won't start

Have you checked the coil

Posted on Apr 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will engine and trans form a 1996 chevy 4x4 pu fit into a 1991 chevy 4x4 pu


WELL YES YOU CAN PUT THEM ON BUT NEED TO REPLACE THEM WITH WIREING HARNESS AND COMPUTERS AND EXUST SISTEM THATS THE ONLY WAY THEN YOU WILL HAVE PROBLEM GETING IT TO SMOG UNLESS YOU TAKE TO STATE SMOG REFERY

Nov 28, 2012 | 1991 Chevrolet Silverado 2500

1 Answer

1989 chevy 350 pu. started and died. engine turns over freely. i have determined it is not a fuel problem. where to start?


Check coil for spark. Which type if Dist does it have? Should have High Enegry which are know for modueal in the dist going out.

Oct 03, 2011 | 1990 Chevrolet K1500

1 Answer

What color of wire terminal to disconnect when setting the timing on a 1987 chevy c-10 pu and location


need more info....engine size etc, but should be a brown or tan wire located near brake booster....has a connector. It is a single wire

Feb 19, 2011 | 1987 Chevrolet S-10 Pickup

2 Answers

Firing order for 1990 Chevy Caprice V8 305


look on intake front side it will tell you the firing order

Sep 18, 2010 | 1990 Chevrolet Caprice

1 Answer

Just bought 95 chevy pu 5 speed manual looks like


Please ensure that this has gear oil because some of these actually ran regular dexron tranny fluid. If it is gear oil a standard 80w-90 is a good all grade gear oil to run in it.

Sep 20, 2009 | 1995 Chevrolet K1500

1 Answer

Sensor reset


disconnect the battery for 10 minutes or use a scan tool to erase them. if the light comes back on in a few miles (about 2 miles as a rule) u have not fixed the problem

Mar 16, 2009 | 1990 Chevrolet C1500

3 Answers

1990 chevy 350 distributor wiring diagram and firing order


The firing order is 1-8-4-3-6-5-7-2.
The distributor rotates in a clockwise direction. The engine must be on the compression stroke on the #1 cylinder. Line up the timing marks. Remove the cap and the rotor should be pointing to approximately the 5 o'clock position.

Good Luck

Mar 06, 2009 | 1990 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...