Question about 2001 GMC Yukon XL

2 Answers

Replace rear brake pads on 2001 yukon xl

Which two bolts do you remove?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 303 Answers

First remove the cap off the master cylinder. Push in the piston on one caliper with a c clamp, or pry it back between the pad and rotor with a prybar. Then remove the 2 bolts on the caliper itself. Replace pads.Go to other side, repeat sequence

Posted on Dec 11, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 93 Answers

You will see two bolts on the caliper. They will go into the caliper. Their will be a rubbe dust grommet and the bolt runs through it. The head of the bolt will be anywhere from a 10-14mm. The caliper bracket bolt bolts to the hub and it is generaly a 17mm or larger.

Posted on Dec 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What tools do i need to change brake pads on 2005 yukon xl


Jack, wheel wrench, socket set, large screw driver, pair of pliers or grips. Lithium grease for the pins. Watch all of these videos. .spell{font-size:18px}.spell_orig{font-size:15px}#mss p{margin:0;padding-top:5px}




g-img{display:block}._WCg{display:block;border:0;position:relative} Search Results

    How To Install Replace Front Brake Pads 2000-06 Chevy ...

    9k=? 4:46 https://www.youtube.com/watch?v=nPohZtD8zlA May 27, 2014 - Uploaded by 1A Auto Parts http://www.1aauto.com/brake-pads/i/1abps00080 1A Auto shows you how to ... Front Brake Pads 2000-06 ...

    HOW TO INSTALL REPLACE GMC YUKON DENALI ...

    z? 14:10 https://www.youtube.com/watch?v=um7dt_yvZ1s Sep 20, 2012 - Uploaded by TheRykerDane Video on how to change the brake pads and rotors on a 2004 GMC Yukon Denali. Changing these parts ...

    How to REPLACE INSTALL BRAKES and ROTORS GMC ...

    2q==? 11:32 https://www.youtube.com/watch?v=UWqows3P4DE Feb 11, 2012 - Uploaded by TheRykerDane Video on how to change the brake pads and rotors on a 2004 GMC Yukon. Changing these parts ... Would ...

    GMC Denali Brake Pads Removal and Installation - YouTube

    z? 3:45 https://www.youtube.com/watch?v=uEKs8nphVxU Oct 24, 2012 - Uploaded by AnotherLookFilms Remove and Install rear brake pads on your 2006 GMC Denali XL. ... 9-21-13 2007 GMC Yukon rear brakes ...

    GMC Yukon Denali Front Disc Brake Pad Replacement ...

    2q==? 8:21 https://www.youtube.com/watch?v=w_gn_l5lYkw Jun 20, 2013 - Uploaded by AMS Automotive Watch the proper procedure for replacing front disc brake pads. Featured vehicle: 2007 GMC Yukon Denali ...





Jan 22, 2016 | Cars & Trucks

1 Answer

2001 Yukon rear disc brake pads are wearing out fast. Just replaced them 30k miles ago. Indicators are touching. What would cause this? Could it be a porportioning valve?


Sadly, that's about average mileage for GM pads. Alot has to do with weight of your rig. Question? Did you replace or resurface rotors? If not, that can accelerate wear, but 30k is about average. If you want longer life, flip for the ceramic or better grade pads.

Mar 10, 2011 | 2001 GMC Yukon XL

1 Answer

I just had my 2002 Yukon XL rear barkes replaced. New calipers and pads,the parking brake doesn't work. Shouldn't they have found that when they were doing this work?


Of course they should have checked the parking brakes too. On the Yukon XL, the parking brakes are brake shoes that operate inside of a drum that is molded to the interior side of the rear disc brake rotors. I would take it back to the shop and voice my frustration if I were you and tell them that you feel they should do the parking brakes at no charge for your time and aggravation. They were right there to replace them if they re-surfaced your rotors anyway!

Feb 21, 2011 | 2002 GMC Yukon XL

2 Answers

How hard is it to do rear disc brakes on a 2001 Yukon XL 4wd . I am thinking about doing a "pad slap" front and rear. Any issues doing that?


Very easy, just going to need some simple hand tools. Possible a torx 55 bit for the front caliper pins and some sort of c clamp to push pistons back. Be sure to lube your slide up well to keep them from rusting up.

May 07, 2010 | 2001 GMC Yukon Denali

2 Answers

On 2001 gmc yukon rear disc brakes after u loosn the bolts on the caliper do they come all the way out and do u have to remove the bracket that holds the caliper on


It should pull off, you may have to get a big "C" clamp and push the caliper piston back, or sometimes you can pry the piston back with a bar or screwdriver, be careful what you pry on.

Jan 05, 2010 | 2001 GMC Yukon XL

1 Answer

I cant get the rear brake caliper off of my 2001 yukon . The bolts holding it on just turn without moving in or out . How do I change the brakes ?


If you will look at the inner part of the caliper that the bolts go into they have a flat side for a wrench to go on. Put a wrench on these flat spots and then remove the bolts. Good Luck

May 16, 2009 | 2001 GMC Yukon XL

1 Answer

U-joint repalcement for 2001 yukon xl


Mark your drive shaft coincidenly with the rear axle and tranny. Remove drive shaft. Press out the old u joints and press in the new. You will need a torch for heat and a lot of patience. Have fun!

Jan 17, 2009 | 2001 GMC Yukon XL

2 Answers

Removing rear brake pads on gmc yukon xl 2000


take a pair of pliers and hold the inter side of the guide and turn the bolt. the bolts is only 8mm w x 25mm L. this will allow you to remove the calipers.

Nov 24, 2008 | 2000 GMC Yukon XL

1 Answer

Brake problem


Hi Tora, Go to the back brakes. This is where the prob could be. But with you bleeding the brakes, the peddle has went beyond its normal travel causing the rubbers in the master cylinder to get messed up. Happens too often! Replace the master cylinder 'after' you had a good look at the back! Frankster016

Oct 25, 2008 | 2001 GMC Yukon XL

Not finding what you are looking for?
2001 GMC Yukon XL Logo

Related Topics:

1,166 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...