Question about 1994 Ford Mustang

1 Answer

Convertible top Where can i find an upholstery in Riverside, California to replace my top on my 1994 mustang?? please let me know

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Try going to your ford dealership and ordering the part. if u already have the upholstery then see if the ford dealership can install it

Posted on Jan 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i separate the old glass from the convertible top on a 2010 mustang


Glass is bonded to top cloth. You must replace entire rear cloth section and sew it to the top. Requires top removal and upholstery sewing machine. Farm this job out.

Jun 16, 2015 | 2010 Ford Mustang

1 Answer

Convertible top coming away from glass window


This is a common problem. At the factory, the top material is bonded to the glass. That bond is breaking down. You can use Gorilla taps or urethane adhesive, but you will eventually need a new window unit.
The window unit is separate from the actual top. The top must be partially removed to replace the window unit.

Karl at aoksales.com

Apr 11, 2013 | 2007 Ford Mustang GT California Special...

1 Answer

I have a 94 mustang gt convertible and one of my pumps is busted/leaking when ever I try to open or close my convertible top now it won't. Open or close


replace the leaking unit first, then fill the hydraulic pump with fluid , it may take a few cycles to remove the air

Aug 17, 2010 | 1994 Ford Mustang

3 Answers

How do you put down the top on a ford 1998 mustang convertible


Make sure the parking brake is engaged first. Then just push the button next to the parjing brake.

Mar 27, 2010 | 1998 Ford Mustang

1 Answer

Need to know how to put the top down on 96 mustang dont have manu


First thing to do is put the car in park and then set the parking brake. Next, release the drivers and passenger side handles (located at the top, above your head when you are sitting in the car, where the part of the top meets the windshield) Both handles are black and you simply pull the lever to release the hooks. After both hooks are released, push the button located near the speedometer (should be underneath the speedometer) on the dash and the top motor will engage and begain to retract the top. Hold the button untill the top disapears behing the back seat

Feb 28, 2010 | 2007 Ford Mustang GT California Special...

1 Answer

Mustang convertible plastic window help


unless the window is the type that zips out you will probably have to replace the entire top. It may be possible to sew a new window in. Check with a shop that specializes in upholstery

Feb 15, 2010 | 1996 Ford Mustang

1 Answer

2005 MUSTANG COVERTIBLE MY REAR WIDSHIELD GLASS IS FALLING OFF


This problem is very common and is known as delamination.
If the problem is not too far advanced, you can repair it with Urethane adhesive. It is used by glass shops to install windshields.
Your top and window unit are two separate parts.
If the problem is beyond repair, you will need to remove the rear half of the top and replace the window unit.

Karl at topgunwon.com

Feb 25, 2009 | 2007 Ford Mustang GT California Special...

1 Answer

2006 Mustang GT Convertible


The rear window for that top is a seperate curtain.
Replacement is best left to a professional.
You should cantact an automotive trim shop (upholstery) for them to quote it.

The way it is replaced, you have to take the top loose, roll it forward, replace the window curtain, reinstall the top. Depending on the condition if the top, it may need replacement also. That is best determined by the shop that does the work.
This is not recommend as a DIY project. I worked in a trim shop for years, and they are not easy.

Oct 18, 2008 | 2007 Ford Mustang GT California Special...

1 Answer

2001 Mustang GT convertible won't go up


You are probably low on fluid.
Behind the rear seat is your motor/pump/reservoir combination.
With the top down, fill the reservoir to overflowing with ATF.
Cycle the system a few times and repeat.
Do this till the reservoir will take no more fluid.
Check the lines and cylinders for leaks. The fluid must be going somewhere.
If you replace any lines or cylinders, always do them in pairs.
Karl at Topgunwon.com

Sep 29, 2008 | 2007 Ford Mustang GT California Special...

Not finding what you are looking for?
1994 Ford Mustang Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...