Question about 1994 Ford Mustang

1 Answer

94 mustang sont know wats wrong



When i first turn it on it turns off on me after like 30 seconds what coulb be wrong with it???

Posted by on

  • Patrick Wilson
    Patrick Wilson Mar 03, 2009

    I had the same problem with my 1994 mustang gt. i had to replace the igniton module which is located by the air filter, and i also replaced the ignition coil. I dont know if theyre the same problem but this worked for mine.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

I had the same problem. what i did was replaced the ignition module and the igniton coil and than it worked fine. I hope this helps. good luck

Posted on Mar 03, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won't turn over fast enough to start


Try to Jump start it with the jumper cables and make sure your battery has enough power to turn the Engine....

Jun 07, 2016 | 1994 Ford Mustang

1 Answer

Will a 95 ford 150 5.0 engine replace a 94 mustang 5.0?


No the electronics will be different. IF you want a replacement engine use only the identical engine from another 94 model mustang or you will have numerous expensive problems.

Jan 10, 2016 | Ford Cars & Trucks

1 Answer

I have a 92 mustang gt,,,,,it will run for 30


when this happens check 2 things fuel supply and spark having spark and no fuel will lead you to the pump and related ckt

Oct 18, 2014 | 1992 Ford Mustang

1 Answer

I changed the front hubs in my 94 rodeo 2.8litre turbo diesel 5sp manual 4x4 and nowe cant get reverse or any other gear but 1st or second wat could be wrong?


When you say U changed the front hubs on the 4/4 WHAT did you change what was differant to the 94 hubs as if you only changed the hubs and backing plates/brakes etc and nothing else Then nothing can go wrong with the gear box unless you changed the hole diff assy.

Oct 05, 2014 | Cars & Trucks

1 Answer

I have a 96 mustang it starts for a few seconds then dies what's wrong?


When you turn the key to run postion see if you can hear the fuel pump run, sounds like the fuel pump may need replaced.

Mar 19, 2011 | 1996 Ford Mustang

1 Answer

My 94 ford mustang is a 3,8 v6. It will turn over but wont start. I have checked everything and Im getting power to the coil box but no spark to the plugs, what do you think is wrong?


You can start here;

ICM Test

See Figure 1
  1. Remove the ICM from the front fender apron.
  2. Measure the resistance between the ICM terminals as shown below:
    1. GID-PIP IN: should be greater than 500 ohms.
    2. PIP PWR-PIP IN: should be less than 2,000 ohms.
    3. PIP PWR-TFI PWR: should be less than 200 ohms.
    4. GND-IGN GND: should be less than 2 ohms.
    5. PIP IN-PIP: should be less than 200 ohms.

  3. If any of these checks failed, replace the ICM with a new one.

Sep 03, 2010 | 1994 Ford Mustang

1 Answer

1996 Ford Mustang Timing Diagram


You must be checking it wrong, as that much advance the car wouldn't run. 

Mar 24, 2009 | 1994 Ford Mustang

2 Answers

Cant get enough fuel pressure to run properly


May have to run in line fuel pressure gauge to determine if the fuel is losing pressure and causing this fault or wether you need to look else where like constant injector pulse,air flow meter,faulty distributor etc.

Feb 15, 2009 | 1994 Ford Mustang

Not finding what you are looking for?
1994 Ford Mustang Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...