Question about 2005 Suzuki Grand Vitara
MY 2007 SUZUKI TRANSMISSION IS NOT WORKING PROPERLY THE FIRST GEAR HAS NI POWER AND THE TRANSMISSION WARNING COMES ON TOGETHER WITH THE ESP LIGHT ON THE DASH BOARD WHAT IS THE PROBLEM
Do you have a brake fluid accumulator(ABS)? If yes, the pistons/pulsing assembly are worn, and may need to be replaced.
If not, you may have a vacuum leak in the power booster (located on the firewall). Check all hose and clamps for a tight fit/cracks,etc. Vacuum leaks cause intermittent brake failure lights.
You may want to park the vehicle on a clean surface, pump the brakes a few times, and check for brake fluid leaks. If there is a leaking wheel cylinder (back brakes) , caliper (front brakes), or brake line, you will be able to see it.
Leaks cause pressure loss, and, thus, the brake warning light will illuminate.
Posted on Mar 26, 2009
It is the check engine light, the computer has detected a fault, and has stored it in memory.
The vehicle needs to be connected to an OBDII handset to read the codes. If you live in the US, take it to any Auto Zone store and they will read off the codes for you, once you have the codes, you are on your way to finding the problem. This may be possible at other major auto parts stores but you will have to call your local store to confirm.
Hope this is of some help.
Posted on Apr 23, 2009
It means there is a fault stored in the computer memory that needs to be identified and fixed.
Have the code read or take it to advance auto and they will lend you the reader so you can plug into the diagnostic port under the dash and read the code.
The code reader can then be used to reset the check engine light and turn it off.
Posted on Jun 05, 2009
Tips for a great answer:
Oct 04, 2016 | 2007 Suzuki Grand Vitara
Jan 22, 2015 | 2007 Suzuki Grand Vitara 4WD
Jun 18, 2014 | 2007 Suzuki Grand Vitara 4WD
Jul 25, 2012 | 2006 Suzuki Grand Vitara
Jan 18, 2011 | 1999 Suzuki Vitara
Jan 02, 2010 | Suzuki Vitara Cars & Trucks
Mar 06, 2009 | 1999 Suzuki Grand Vitara
44 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: