Question about 1993 Toyota Camry V6

1 Answer

Brakes my brake light indicator on front panel lights up when I apply the brakes on my 93 toyota camry

Posted by on

  • Toyota Ed May 11, 2010

    The indicator illuminates to let you know that the brake fluid is low. Brake wear = proportionally lower fluid in the master cylinder. A sensor is in the master cylinder that tells you this. You may need your front brakes replaced. Pull the wheels and check the front pad thickness, and then get back to me. Thanks for choosing FIxYa.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi have not had chance to check will do tonight , thanks

Posted on Dec 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix brake lights on a 93 Toyota camry.


Check switch at brake pedal check fuse and globes,check for power with a test light.

Feb 21, 2015 | Toyota Camry Cars & Trucks

1 Answer

Tail lights work but not brake lights 93 toyota camry


The brake light side of the bulbs is powered by the brake switch and travels thru the turn signal switch.
If the third brake light works, I would guess the problem is in the turn signal switch.

Jul 02, 2012 | 1993 Toyota Camry

2 Answers

When the car is being driven in "drive", if the brake is applied the "R" reverse indicator light comes on. The "D" drive indicator stays on, both when the brake is on or off,...


That is wires in the a common problem there is broken in the trunk, were trunk lid and body get together there is a harness, peel that harness and you will find the broken wires.

Jan 01, 2011 | 1993 Toyota Camry V6

1 Answer

I have head lights and running lights but no brake lights and i keep blowing my blinker fuse there is no power going to the brake lights.. but the small brake light in the window works.... my dad cant find...


the brake light switch is at fault for all these problems
get a replacement.
the top mount brake light works off a separate module so that is fine as of now

Mar 02, 2010 | 1993 Toyota Camry V6

1 Answer

97 toyota camry brake light is on in my dashboard


Check the brake fluid level and top off to full mark if it still stays on then you have a brake system failure in the hydrolic system front or rear brakes are not working and the light is telling you that.

Jan 05, 2010 | 1997 Toyota Camry

1 Answer

Several warning lights on dash, vibration when brakes applied.


it sound like it to me that the alternator need to be tested and the brakes need to be chechout give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.

Jan 04, 2010 | 2000 Toyota Camry

1 Answer

Gear shift wont release when the brake is pushed


See if your brake lights are working you may have a blown stop fuse.
you can remove the small acsess panel by the shifter and put a somthing in the hole to manually release the shifter.

Sep 19, 2009 | 1993 Toyota Camry V6

2 Answers

When brake is applied,the rear light on the panel come on.


You might wanna have your rear brakes checked along with the rear brake calipers or cylinders, as well as the rear drums or discs, depending on weather your car has rear drum brakes or rear discs brakes. Some cars come equipped with brake sensors that let you know when theres a problem. It would also be a good idea to check you brake fluid level.

Mar 12, 2009 | 1990 Toyota Camry

2 Answers

1994 camry reverse indicator ilght on when breaking


Hello! May I suggest possibly a bad earth? can you try standing at the rear of the vehicle with ignition on ask your wife to apply the brakes, do any other lights glimmer? failing this with brakes still applied pop into reverse and see if any lights glimmer or come on? try again with left or right indicator's flashing and brakes applied, is there an irratic signal or are the reverse lights blinking too?
If any of the above take the bulb holders out of the rear lenses look for corrosion, bad contacts, broken filiaments and security. Clean and replace then see what happens.
Just a thought?
Hope this works? Good Luck!
Paul 'W'
Onyer~EDSon(:0)~[><

Dec 10, 2008 | 1994 Toyota Camry

1 Answer

2005 camry tail light blows


Does it work when you press the brake pedal? If so, sounds like you have a faulty bulbs. IF it doesn't work when brake pedal is applied I would check the fuse under the hood or left kick panel on the driver side.

Sep 20, 2008 | 2004 Toyota Camry

Not finding what you are looking for?
1993 Toyota Camry V6 Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...