Question about 2001 Chrysler Voyager

1 Answer

Engine wont start

I press the key but dont start

Posted by on

  • CUWATE Feb 27, 2009

    I TURN THE KEY ON AND EVRYTHING TURNS ON BUT WHEN I TURN IT ALL THE WAY TO START THE ENGINE IT DOSEN'T TURN IT ON.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 93 Answers

Is it clicking at all. Do you have power.

Turn the headlights on are they bright. Turn the key over do the headlights stay bright.

Start with the easiest and most common problem. Battery is head is has a dead cell and is unable to hold a charge strong enough to turn the engine over.

Posted on Dec 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Will not crank. I press the start button, the dash lights up, but won't crank.


that could be a faulty starter motor relay or starter bendix or bad positive or earth connection

May 22, 2016 | 2010 Suzuki Kizashi

1 Answer

My radio in my 2004 dts will not turn on after battery went dead


You need to gete the radio security code and enter it in. Just call or drop by the dealer and theye can give you the code or enter it. Should be free but your dealer may vary. When you changed the battery and lost power the radio goes into a secure mode just in case it was stolen. The code should be about 4 digets long so its not a big thing to enter. its keyed to your vin number so the d ealer may want to see that as well as your registtration and maybe a drivers licence depending on how paranoid they are.

Aug 16, 2012 | 2004 Cadillac Deville

1 Answer

How do you reset change oil/filter in a 2009 nissan murano?


turn the key on but dont start, press the gas pedal 3 times to the floor. shut key off then start as normal

Dec 23, 2011 | Nissan Murano Cars & Trucks

3 Answers

How do you reset anti theft on a 2007 equinox


TURN ON IGNITION SWITCH TO ON POSITION.ENGINE OFF.REPEATEDLY PRESS VECHICLE INFORMATION BUTTON UNTIL PRESS TO RELEARN REMOTE KEY IS DISPLAYED.PRESS SET RESET BUTTON UNTIL REMOTE KEY LEARNING ACTIVE IS DISPLAYED. IF THAT PROCEDURE DONT WORK.INSERT MASTER KEY INTO IGNITION SWITCH.NOW SWITCH IGNITION ON SWITCH IGNITION OFF.REMOVE MASTER KEY.WITHIN 10 SECONDS INSERT NEW KEY.SWITCH IGNITION ON.ENSURE SYSTEM WARNING LAMP SWITCHES OFF.NEW KEY NOW PROGRAMMED.IF YOU STILL HAVING PROBLEM RESETING THEFT SECURITY SYSTEM THE DEALERSHIP HAS TO FIX.REPROGRAM IT.

Mar 14, 2011 | 2007 Chevrolet Equinox LS New Cars

1 Answer

2004 Sabb, the ignition will not turn to start the car. No issues before with ignition.


MAKE SURE YOU DONT HAVE THE WRONG KEY.TRY ANOTHER KEY.PUT KEY IN THE IGNITION SWITCH.TURN IGNITION TO THE ON POSITION.WHEN LED FLASHES TWICE THAT INDICATE KEY IS RECOGNIZED.IF KEY CODE NOT RECOGNIZED A MESSAGE ON THE TRIP COMPUTER WILL BE DISPLAYED.TO ENABLE ENGINE TO START WHEN KEY CODE NOT RECOGNIZED.SWITCH THE IGNITION ON.PRESS ANY KEY REMOTE TRANSMITTER BUTTON ONCE START THE ENGINE.IF ALL FAILS. THE KEY SWITCH TRANSPONDER FAILED OR THE KEY LOCK CYLINDER BROKEN, IMMOBILIZER MODULE FAULTY VECHICLE HAS TO BE SCANNED TO LOOK FOR FAULTY IMMOBILIZER MODULE.

Jan 18, 2011 | 2008 Saab 9-3

3 Answers

Oil change light wont go out on a 1999 grand am


Hello Dyno.
Have you tried using this procedure to turn it off?




OIL LIFE MONITOR SYSTEM

Resetting Procedure

  1. Turn the ignition to the ON position, engine OFF.
Drivers Side I/P Fuse Block 86382201


  1. Press and release the RESET button on the drivers side I/P fuse block.
    • The CHANGE OIL indicator will start flashing.
  1. Press and hold the RESET button until an audible chime is heard and then release.
    • If the CHANGE OIL indicator comes back on, the system did not reset. Try the procedure again.

Nov 10, 2010 | 1999 Pontiac Grand Am GT

1 Answer

I just got a used car. it came with the original key pad to the car, and a remote start key pad. no books on how to use it. i dont know what buttons to push on either pads to use my remote start. any...


Assuming that the car actually has remote start circuitry (probably does if the remote you have has the actual button for it), and also assuming that the radio DIC has remote start ENABLED, here is how you start it . . . press and release the LOCK button, then press and hold the Start (top) button for like 1-2 seconds and the car should start OR the lights will flash.

Nov 10, 2010 | 2005 Pontiac G6

1 Answer

Cant unlock lambourgini gallardo at all key fob just stopped working key wont unlock door and buttons dont open either


theoverachie_4.jpgtheoverachie_3.jpgtheoverachie_2.jpg
Take the key apart, replace the battery. The car needs to relearn the key, so stick it in the ignition, turn the car to the "on" setting without starting, press the unlock button on the fob. Thats it!

Nov 02, 2010 | 2004 Lamborghini Gallardo

2 Answers

How to remove the oil change light after doing an oil change?


turn the key as far as you can without starting it press the gas pedal 3 times all the way to the floor and shut the key off you have to do it all in a 5 second window so you might have to try a few times befor you get it if you dont turn the key off quick enough it wont work

Feb 24, 2010 | 2005 Pontiac Aztek

Not finding what you are looking for?
2001 Chrysler Voyager Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...