Question about 2001 Hyundai Sonata

1 Answer

No turn signals and emergency flashers. fuses all good cant find flasher

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Could be corroded wires inside the left rear fender well you need to access this from the trunk was the problem on mine

Posted on Dec 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the flasher unit for 1999 mercury mountaineer?


It's the same flasher unit for both turn signals AND emergency flashers. Even though one side works, the other won't. If you have a good fuse for the turn signals, then replace the flasher unit.

Aug 04, 2014 | 1999 Mercury Mountaineer

1 Answer

1970 beetle how to fix flashers


1. Do your emergency flashers work?
Check all your fuses, make sure they are getting a good contact.
If your emergency flashers work, it may be a faulty turn signal switch.
If your emergency flashers work that will eliminate the flasher. The one flasher works both turn and emergency signals.

Jul 05, 2014 | Volkswagen Beetle Cars & Trucks

1 Answer

Control ?i have a 1997 s10 pick signal flashers ( right and left ) stopped working, fuse replaced no go, all other electrical working ( brakes /emergency flashers etc) what do you suggest mission


The flasher may have gone bad for the turn signal, and there may be a second flasher for the emergency flasher lights. Look and listen for a click of the flasher for the emergency flasher lights. Then, the other flasher is the one to replace.

Good luck on this repair.

Dec 18, 2010 | Chevrolet S 10 Cars & Trucks

1 Answer

I drive a 2000 mitsu. mirage. my turn signals just stopped working. i checked the bulbs the fuses they're good. the emergency flashers work im wondering if maybe its the turning module but i dont know...


The emergency flasher switch is also the turn signal flasher It pops out of the dash and can be replaced easy. do chaeck the fuses before going to this much troble. check all the fuses as some work backup circuits that you wouldn;t think would be important. Before replacing the flasher switch ( you may only be able to buy it from the dealer) work the switch several times and the flashers will come on cheak to see if allthe lights work thenturn the flashers off and see ( with the key on if the turn signals now work. Now if during the test with the four way flashers you see a bulb or more out you know that the turn signals wouldn't work, but the four ways will. they work on different fuses so chak the turnsignal fuse too. after cycling the switch try the turn signals again as the switch is likly to stick and sometimes cycling it will get the turn signals working again. Fooling around with the switch you may find a position that the turn signals work. if you can't get it to stay working then you'll have to change the flasher emergency switch.

Sep 30, 2010 | Mitsubishi Mirage Cars & Trucks

1 Answer

1997 Chevy Tahoe both turn signals stopped working


Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Jul 21, 2009 | 2001 Chevrolet Tahoe

1 Answer

1995 F150 the turn signals do not work, but


Look in the fuse panel and the turn signal flasher is the big round most likely yellow or silver in the corner of fuse panel. The emergency flasher is in the back side of fuse panel right directly behind the turn signal flasher.
Remove the emergency flasher and install it in place of the turn signal flasher and see if this corrects the problem and if so get a new flasher. If this does not correct it problem will most likely be the multi-function switch.

Mar 13, 2009 | 1984 Ford F 150

3 Answers

Flasher or turn signal switch


When you select left or right do any of the bulbs come on? If you select left check front and back left side if one of the bulbs did not come on the flasher will not work. Change the bulb that is out. Same with the right. If the fuse for the turn signal is good (check fuse or replace do not use visual, some appear to be good but are not).
The emergency flasher is different from the turn signal flasher. Look at manual for location of turn signal flasher. If you manually lift and lower turn signal control you may hear a clicking under the dash to locate the flasher.

Jan 02, 2009 | 1995 Chevrolet Caprice Classic

1 Answer

Can't find the turn signal or emergency flasher fuse for 1998


Conrad, up north.
My protege is a '99. The turn signals and hazard flashers use the same flasher unit. It is located under the dash to the left of the steering wheel and above and a bit to the right right of the driver's side fuse box.

Dec 07, 2008 | 1998 Mazda Protege

3 Answers

Blinkers stopped working


Your F--150 has 2 flashers, emergency and turn signal. Both are mounted on the fuse block under the dash. The turn signal flasher is mounted on the front of the fuse panel, the emergency flasher is mounted on the rear of the fuse panel. so replace the turn signal flasher should solve the problem. Let me know how it goes.

Oct 20, 2008 | 1996 Ford F150 Regular Cab

Not finding what you are looking for?
2001 Hyundai Sonata Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...