Question about 1997 Buick Century
When I turn the turn signal switch, the dash indicators light up but 3 out of the 4 turn signals do not work. I have replaced all of the bulbs and check the fuses, what would my next step be?
SOURCE: 1998 Buick Century Signal Issue
Remove the bulbs one at a time and check for dirt and corrosion at the contacs inside the sockets.The corrosion will cause higher than normal resistence and will make the signal to flash rapidly.As this only happens to the right side only check the right side.
Posted on Jun 25, 2008
SOURCE: headlights won't come on
both headlight bulbs need changing/ check the fuse first under the dash and in the engine compartmentplease rate my response thank you very much
Posted on Jan 31, 2009
SOURCE: 93 buick century -turn signals
The Buick Century uses separate relays for the hazard warning and turn signal functions. The turn signal relay is located on the accelerator pedal bracket, and the 4-way flasher relay is located on the convenience center near the left kick panel. Try switching these two relays with one another to see if your turn signals work instead of your 4-ways.
Posted on Sep 28, 2008
k you will have to pop out the whole light fixture and there should be a conduit where the bulb is conected to just turn it and take it out and replace the bulb
Posted on Jul 09, 2009
Time to change the flasher unit, it's usually close to the drivers side of vehicle and behind a fuse box access panel and will have something like "12v 23/98W " on it. It's a largish cube shaped componant and may be water damaged !
Posted on Apr 11, 2010
Tips for a great answer:
Nov 29, 2015 | BMW X5 Series Cars & Trucks
Sep 21, 2014 | 1988 Buick Century
Jan 15, 2014 | 1990 Buick Century
Mar 14, 2011 | 1997 Buick Century
Feb 25, 2011 | 1993 Buick Century
Apr 10, 2010 | 1997 Buick Century
Dec 11, 2009 | 1996 Buick Century
Apr 23, 2009 | 2001 Buick Century
Sep 28, 2008 | 1993 Buick Century
537 people viewed this question
Usually answered in minutes!