- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
it can be a number of things ac clutch idler pulley trencher alternator power steering water pump and belt most likely is an old belt because its stiff and slips when cold it warms up the belt is more flexible and it grabs beater the trencher can be weak and with the cold belt it can slip
I hope its your release bearing, but I had this same issue with my Audi and it turned out to be I need a new transmission, the gears are not catching it sounds like. your synchros may also be off. Does it do this in every gear, and once it does move, does the clutch slip?
Remove the serpentine belt notating the direction of travel. Start the vehicle long enough to confirm the chirp is either still present or it has stopped.
If the chirp stops manually spin all the pulley by hand to see if you can duplicate the sound. If nbothing else is making noise and the belt is in good shape put the belt back so that it travels in the opposite direction. If the noise persists replace the belt. If the noise goes away see how long it lasts. I have had many that have not returned after rotating the belt.
One other thing you can try is putting a small dab of di-electric grease on the belt, with the engine off of course. Spread the dab around a little with a finger, again with the engine off. Start the vehicle, give it a couple of seconds to let the grease work around the belt. If the noise goes away replace the belt.
Start by isolating the issue. Remove the belt and start the engine. If it is still there, it is likely resonating through the engine from the flywheel/flexplate. If it dies, spin the alternator. This was a problem in some of there cars. Let me know what you find.
1st thing to check is when you put in gear when cold and again when hot Take off fast ,,the noise if there igoes up and down with the speed and rpm ,,the noise you can hear mostly is the pump in side the gear box is not pushing enough pressure to the Forward Band clutch which drives the car so it has to slip and that is what you can smell the clutch bands burning And the more you can smell it the worse its getting and soon will let you down in a place you dont want to be..
So get it checked out new or as soon as poss
The A/Con clutch also sounds like its worn out.