Question about 1993 Honda Accord

1 Answer

Wont start yes i have spark just put new plugs and wires and dist.cap on

Posted by on

  • Anonymous Dec 14, 2008

    Mine won't start cold, cranks fine, next day starts up the first crank

  • yadayada
    yadayada May 11, 2010

    U make no mention of whether u have fuel pressure.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 55 Answers

Ignition modules are always on the fritz in cold weather with Honda vehicles. If you have spark, fuel pressure and your timing belt hasn't jumped a tooth I would lean towards that as being the problem.

Posted on Dec 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had my 92 prelude started once i put a new battery in after sitting for 2 years. The next day it wouldnt start i have new dizzy new plugs new wires new coil and the icm and now it wont start. I have fire...


Check the inside of the distributor cap for "carbon tracks", which is a bad cap with a path to ground for the ignition pulse. You would need a new dist. cap and rotor, if you see those carbon tracks.

Feb 03, 2015 | Cars & Trucks

1 Answer

DIST WIRING 1.6 88 TOYOTA COROLLA


what about coil? check whether you have or not spark from coil to distributor,or from distributor to spark plugs.

Aug 16, 2012 | Cars & Trucks

1 Answer

Crv shut down oil cap lefted off and oil all over engine and truck shutn down checked and found oil fill the spark channel and boots so replace the gasket and plugs and cleaned off the wires and now have...


have you put a new set of plug wires on it. use a spark plug tester, and put it between plug wire and dist, cap. if it is sparking you will see it. if yes and not to plugs put on new plug wires. good-day ! if above checks out. remove dist, cap and see if shaft of dist, is turning. some of the hondas have a plastic type drive gear on bottom of dist, shaft. that goes bad.

Sep 21, 2011 | 2000 Honda CR-V

2 Answers

95 honda civic hatchback wont start


Did you hooks the the spark plug wires right. If these are not in the right order then you will have a misfire. If enough of them are out of place then you wont have enough fire to start the engine.

Mar 03, 2010 | 1995 Honda Civic

1 Answer

94 royal begis to cut out, chugs at about 55


Replace the spark plugs and wires along with a distributor cap and rotor. Be careful to leave the old wires and plug wires connected to dist.cap, just remove dist. cap from the distributor and lay aside with plug wires on it then install rotor then new cap and proceed to replace each wire for cap and spark plug one at a time so you don't mix up the spark plug wire firing order. Cap laying to the side is used for reference purpose.

Feb 26, 2010 | 1994 Oldsmobile 88

2 Answers

1997 gmc savana 4.3, wont start ,has new fuel pump, new pressure regulator, new spark plugs , i cleand up the maxi ijector, looks ok no leaks,i do have spark and fuel but still wont work any ideas


only 3 things will cause this engine not to start (crank and not start) fuel, ignition, timing.
You haven't mentioned the engine cranks over or not, so I have to assume it cranks over.
Possible timing chain or the crank sensor on the timing chain. Have you checked this? you need to remove number 1 spark plug & when the piston is in the full top position on compression, remove the dist cap & see what spark plug wire the rotor is pointing to inside the dist cap. (I'm sure if you google checking for top dead center you'll find the proper procedure)

Oct 12, 2009 | GMC G3500 Cars & Trucks

2 Answers

Wont start after it died one night


The cap should be marked for number 1. The distributor turns clockwise. The firing order is 1-3-4-2.

Mar 22, 2009 | 1986 Honda Civic

Not finding what you are looking for?
1993 Honda Accord Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...