Question about 1988 Chevrolet K1500

1 Answer

Back brakes on 88 chevrolet pickup

Master sill, storage tank under master sill, 2 brake calibers, 2 lines, lines bleed and still not enough brakes to stop if an emergency stop, can you suggest anything...

Posted by on

  • yadayada
    yadayada May 11, 2010

    HAVE U TESTED THE MASTER CYLINDER VACUUM BOOSTER?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Sounds like the brake booster which is the big black round thing behind the master cylinder it it has a vacume leak to the brake booster.

Posted on Dec 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brake system all new but pedal goes to the floor


double check the brake master cylinder and brake piston cylinder.

Mar 11, 2015 | GMC Sierra Cars & Trucks

1 Answer

Can't bleed rear brakes RWAL


Here's a link on bleeding your brakes,you may need a scan tool to do it.

Nov 23, 2013 | 1997 Chevrolet S-10 Pickup

1 Answer

I just replaced the brake master cylinder and rear wheel cylinder on my 1987 toyota pickup, and now I have no fluid going to the back brakes. Bleeding them does nothing


check for fluid before and after the proportioning valve by disconnection the line after the valve and applying the brakes, if no fluid after valve try before valve if fluid is there then it is a bad proportioning valve. you did bleed the master cylinder before connecting the brake line and trying to bleed the brakes all at once right? If the master cylinder was not bled first then a lot of air may have been forced into the rest of the brake lines.

Oct 01, 2011 | 1987 Toyota Pickup

1 Answer

Changed both front (rears are drums and did not change) brake calibers and pads on my 1998 F150 pickup 2 wheel drive. In doing so I let the master cylinder go empty. How do I bleed the brakes now. I have...


your probably going to have to bleed the entire system.1st try & bleed the master cyl.
basicly the same as you would bleed the front/rear brakes. pump pedal & hold while someone
loosen the brake line on the master cyl. after m/c is bleed move to r/r,l/r,r/f,l/f wheels in
that order. if you have abs brakes & you got air in the pump a scan tool may be needed
to bleed properly.

Jul 17, 2011 | Ford F-150 Cars & Trucks

1 Answer

How to bleed hydraulic slave/master cylinder on 1989chevy s10 pickup?


Bleeding the slave cylinder is done just like bleeding your brake system.Just be sure that you keep enough fluid in the master cylinder so that you don't have to do it all over.Also make sure you have a steady stream of fluid.as you would with your brakes.

Mar 18, 2011 | 1997 Chevrolet S-10 Pickup

1 Answer

I have a 1997 chevy cavalier. I replaced wheel cylinders, brake lines, front calibers master cylinder and booster. When I bleed the brakes I only get brake fluid from the front bleeder on the ABS system. I...


sometimes if you leave the bleeder screw open it will gravity bleed the cylinder.Make sure master cyl is full and do one wheel at a time.I have seen this work, I have done it.

Nov 16, 2010 | 1997 Chevrolet Cavalier

3 Answers

05 chevy classic malibu do brakes need to be bled completely to change pads or just enough to compress piston and where is location of bleeder valve


You do not have to bleed them at all. Remove the cap off the master cylinder and you can then compress the caliber to remove the old pads and install new ones. No need to belled unless you replace the master cylinder or a caliber.

Oct 30, 2009 | 2005 Chevrolet Malibu

1 Answer

Can't get front brakes to work


fill master cylinder, slowly close of brake lines to be sure you have pressure from master cylinder, pump brakes to check master, check that calipers were seated in housing properly

Aug 08, 2009 | 1997 Volkswagen Golf

1 Answer

Master Cylinder replacement on 1995 Oldsmobile 88


Start with right rear then left rear,then right front then lft front,Would rebleed at master cylinder 1st.

Jun 18, 2009 | 1995 Oldsmobile Eighty Eight

1 Answer

Back brakes 88 chevrolet pickup


your proportioning valve is sticking. try pressure bleeding front this should help it move back might wanna tap on it with a hammer also.this is the valve whre all the lines go in and come out

Dec 10, 2008 | 1988 Chevrolet C/K 3500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...