Question about 1995 Chevrolet Suburban

1 Answer

1995 cheve suburban back bark door replacement

The left rear windown in the back barn door on my truck was broken. went to salvage to get a replacement, but they sent the whole door. They sawed thru the hinges but left the part connected to the door with the pin still in it. I understand that the window seal is hard for me to do the window myself. So how can I get the pin out of the replacement door and the door still on the truck so I can switch them out?

Posted by on

  • limeagle1 Jan 07, 2009

    My left barn door has rust damage ane I purchased a replacement at a salvage yard. The hinge was also sawed off. Pressing the pin out with a hydraulic jack or a special jacking tool will probably be required. Appreciate any help.


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Try a hammer drift punch if there not to stuck  driver from bottom up

Posted on Jan 17, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need a left front door module, the dealership can't find one and my car is sitting there waiting for me to bring it to them.

The link I sent you in your other posting is a nation wide salvage locator. Put in your information and search for your part. Most yards will not list a door module, so search for a whole front drivers door and see if they will sell the module out of it.

May 25, 2016 | 2002 Lincoln Town Car

1 Answer

How can l remove back door on my 1996 Honda passport door from inside.

How To Install Replace Fix Broken Rear Outside Door ...

? 9:52
Jun 15, 2011 - Uploaded by 1A Auto Parts
1A Auto shows you how to repair, install, fix, change or replace a broken .... The outside door handle is broken on my HondaAccord and the child ... How To Install Replace Broken RearOutside Door Handle 1996-00 Honda ...

Can't open rear door - Car Forums and Automotive Chat - Automotive ... > ... > Isuzu > Rodeo ' Passport ' MU
Can't open rear door Rodeo ' Passport ' MU Car Forums. ... The driver side rear door on my 95 Rodeo won't open. ... You can remove the door panel without opening the door. ... I've got a 96 Rodeo and the DS RR door was stuck as well. ... I went to aHonda dealer (lack of ISUZU dealers in my area) to get the part, it only ...

Oct 30, 2015 | 1996 Honda Passport

2 Answers

Rear window will not go up. how do you replace the window motor? the switch on the main driver door does not work and the back rear passenger switch is not responsive either. I'm thinking the motor went...

See if you have power at the rear switch (a simple circuit tester works for this). If you do, then check the switch itself. If you have power on both sides of the switch then it's time to tear off the panel and see if you have power to the switch, if you do and the ground is good, the motor is probably shot. New ones are pricey, I'd head to my local salvage yard for a replacement.
IF.... you DON'T have power at the switch you may have broken wire inside the rubber boot at the drivers door. Over time, the opening and closing of the door flexs the wires and they sometimes break. I have had this happen more times than the motors going bad.
It's just a process of elimination.

Good Luck

Feb 09, 2011 | 1996 Oldsmobile Aurora

1 Answer

Replacing rear ceiling AC blower motor.

Usually the fan is located at the left rear of the inside of the vehicle.Then ducts run to the roof...

Jun 28, 2010 | 1990 GMC Suburban

1 Answer

My left rear light cover is broken. I need to replace it. Do I have to replace whole unit?

These days they're all one piece, so my guess is "yes". I would recommend calling a few salvage yards though... It won't cost you near as much as getting it from a dealer.
Hope this helps... Good luck!

Oct 15, 2009 | 2005 Lincoln Aviator

1 Answer

How to replace lug studs on 2002 chrysler town

I'll try to help you. If you are having trouble with 3 out of 5 studs on one wheel you may want to go to an autoparts store or Salvage yard to look at the whole hub. Usually a press is used to remove the bolts so you would be taking off the hub anyway. When you pay for 3 bolts and labor you may be better off in a Salvage yard or parts place for a different hub. The rear hub on front wheel drive cars is like a trailer axle. Much simpler to remove mounting bolts and press in new bolt. But if rear has differential(rear wheel drive) it has an axle shaft. Would be easier to grind and drill out broken stud on car. You can draw new bolt into place by placing bolt through a socket and use the wheel nut to draw the bolt into the hub.

Jul 08, 2009 | 2009 Chrysler Town and Country

2 Answers

I need to replace broken window 1997 suburban barn door

First of all check your call your auto insurance company as most vehicles carry glass replacement which means u can get this done for you at no cost.

Apr 11, 2009 | 1995 Chevrolet Suburban

1 Answer

Rear driver side power window will not work

I'm guessing you've removed the door panel since you said you removed the switch. but just in'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. Then pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything.It sounds like the motor may have died you on if you cannot hear could also be the regulator or linkage has broken

Apr 10, 2009 | 1999 Buick Century

1 Answer

Rear gate (barn doors)

Climb into the back of your Yukon, using a apholstery tool (looks like a bent screwdriver with a claw on the end) or a putty knife and pry the bottom of the inner door skins off cut a 6 inch gash in the clear plastic to expose the door handle mechonizims. spray brake cleaner on the inner latch to clean, then using penitration oil to unsieze. Grab the long metal rod and work it up and down...the should open. repeat to the other door if it will not open as well. I had to replace my barn door inner latches on second barn door. (the door that opens last) with safari barn door latches. I got them from a wrecking yard cheap. ($15.00) to replace at GM....over $200.00. The wrecking yard told me the latches wouldn't work, but I look at the Safari latches and they were identical. My barn doors work perfectly. Hopefully this helps.

Jul 22, 2008 | 1999 GMC Yukon

1 Answer

Door does not open

If you have the barn-style rear doors the lock mechanism has small plastic clips inside that basically join the handle to the metal rod that opens the latch. You have to take off the inner trim panels and then peel back the plastic liner and you can see if one of them is broken. Most auto parts stores have the clips in stock for around $3.

Jul 03, 2008 | 1995 Chevrolet Tahoe

Not finding what you are looking for?
1995 Chevrolet Suburban Logo

449 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

74688 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7288 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides