Question about 2000 Oldsmobile Intrigue

2 Answers

Front right turn signal

Doesn't work, bulb has been replaced, no good; back right turn signal and flashers work just fine, dash lights work and head lights work, but front right turn signal does not. How do I fix it?

Posted by on

  • 4 more comments 
  • ajitcg Dec 31, 2008

    My front left & Right signal lamps wont work. Tried replacing the bulbs, in vain

  • twotable Jan 25, 2009

    I have the same problem, they told me it was a switch that would cost $200. I haven't had it fixed yet, sounds crazy to me. Twotable

  • Bigb614 Mar 21, 2009

    I have the same problem... all bulbs have been replaced and the interia notification signal does not come on and you hear it blinking very quickly.. I've tried to change fuses but the guide doesn't really show you which fuse should be changed.

  • Anonymous Mar 13, 2014

    Right turn signal doesn't work front

  • Anonymous Mar 16, 2014

    dash panel lights go crazy.

  • Anonymous Mar 16, 2014

    car cuts off when right turn signal is turned on.dash panel lights go crazy.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had a bad socket that was my problem on mine.

Posted on Dec 19, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You need to replace the whole socket. Unfortunately I was told by an auto wrecker that the daytime running lights on the front of the intrigue heat up the plastic in the black socket your bulb sits in and the plastic melts and prevents a proper contact with the bulb. I got a replacement socket and bulb for $15 at the auto wreckers. Money well spent - it is easy to replace! Your bulbs are probably not burnt out.

Posted on Apr 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

5 Answers

How do i replace the turn signal flasher in 2006 cobalt


Check you bulbs first because a bad bulb will cause this also !

Dec 30, 2014 | 2006 Chevrolet Cobalt

2 Answers

My right front turn signal on my 2001 ford ranger doesnt work and my inside right turn signal light on dash doesnt work and flashes really fast. Buld on right side was replaced and works when lights


was the correct bulb used? this sounds like a single function bulb was used NOT the bulb that will light with the headlights and ALso produce turn singles

Dec 06, 2014 | 2001 Ford Ranger Regular Cab

1 Answer

Cant resolve a blinker issue, Tried the easy stuff.


The signal wire going to the right front has a splice for the dash indicator, a wire branching off from the turn wire and going to the dash. It sounds like that right signal wire is broken or lost a connection before it splices off to the dash, so the problem sounds like it is under the dash, either coming out of the turn signal switch to the flasher or from the flasher to that splice. You may need a multi-meter to check voltages on that wire at various places under the dash. Ascertain which color wire you need to concentrate on. Check for voltage on it with key on and right blinker on-voltmeter will spike to battery voltage, then fall to zero as the flasher breaks voltage continuously, if checked after the flasher. If checked when leaving the turn switch, it should be a continuous signal on that wire. Think you better find a wiring diagram to find the right wire to check. Good luck.

Apr 27, 2013 | 1998 Buick Century

1 Answer

Right front side turn signal does not work replaced all bulbs and checked fuses headlight flashers work when hazards are on front to back except driverside turn signal ,in dash right stays solid left


I don't believe it would be a bad ground for just one light. It could be a wire, a socket connector, or the bulb socket itself. See if the wire has power at the socket when signaling left, with key on. If there is power, probably a bad socket or connector. If no power, check for power coming from flasher-the wire going to front left, or driver's side. If you have power from the flasher, but nothing at the socket, the wire has probably broken.
Good luck.

Feb 06, 2013 | Cars & Trucks

2 Answers

Turn signal will eluminate but not flash. emergancy lights work and flash fine. Have replaced the flasher and turn signal switch.


You know you have 2 flashers right, one for emergency flashers and one for signal lights? Does it refuse to flash on both sides, right and left? Have you checked all bulbs front and back are good?

Jan 27, 2013 | 1993 Plymouth Sundance

1 Answer

Turn signal dosent work


you need to check to see which bulbs don`t work both front and back lights for the signal on the side it`s not working,you don`t say if any signals work or not if no signals work then you need to check the fuses under the dash on the driver`s side.now if it`s just one side then check the lights as mentioned above.if one isn`t then replace the bulb.if neither bulb is working then it sounds like the signal flasher is not working.turn on the hazard flashers and check the lights front and back.if all bulbs work then leave the hazards on and look under the dash for the flasher that is making the noise,this will show what the signal flasher will look like,then find the signal flasher on the fuse panel under the dash it should be located on the fuse panel.and replace

Mar 15, 2011 | 1997 Dodge Ram 1500 Club Cab

4 Answers

Front driver side turn signal light doesn't flash.replaced bulb,replaced socket,all other lights work on emergency flasher,except front driver side.rear driver side turn signal light works,but flashes...


replace flasher......usually located in fuse block area...listen in this area....select passenger side ...then select driver side...you can hear flasher clicking...you have seperate flashers for each...FLASHERS are small cubes plugged into fuse block....probable bad driverside flasher

May 09, 2009 | 1998 Buick Century

2 Answers

Turn signals dont work 97 Geo Metro


we found the flasher curcuit had no power to the hot prong. So my friend wired the flashers hot prong into the radios fuse curcuit to get power to it and put a separate 10amp fuse on the new lead.

Jan 22, 2009 | 1991 Geo Metro

3 Answers

Flasher or turn signal switch


When you select left or right do any of the bulbs come on? If you select left check front and back left side if one of the bulbs did not come on the flasher will not work. Change the bulb that is out. Same with the right. If the fuse for the turn signal is good (check fuse or replace do not use visual, some appear to be good but are not).
The emergency flasher is different from the turn signal flasher. Look at manual for location of turn signal flasher. If you manually lift and lower turn signal control you may hear a clicking under the dash to locate the flasher.

Jan 02, 2009 | 1995 Chevrolet Caprice Classic

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

457 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

71288 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7009 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...