Question about 1998 Lincoln Town Car

1 Answer

I need to change stop light bulbs in my 1998 lincoln town car

How do I get to the bulbs to change them?

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Open the trunk, and pull the linning away from the body. It should easly move. you have access to the lighting fixture. determine which is the stop light and turn the base counterclockwise to open. remove the blown bulb. To install the new, do not touch with your bare hands, use a soft cloth or paper towel to seat the bulb into its socket. reinstall by truning the bulb clockwise to seat in place. Press your linner back into place.

Posted on Dec 10, 2008


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: how do change the rear

Here is a site that has the Ford Factory service manuals. Should be able to find the answer and pictures and more. The file is in zip format of an ISO file (disk image file) instructions on page how to make cd.
Hope this helps, With anything you may need on your 98 towncar

Posted on Feb 15, 2009

  • 3 Answers

SOURCE: Need to change air suspension compresor of 1998 Lincoln Town Car

You should consider looking into one of Strutmasters air suspension conversion kits. Here is a link to their Lincoln Navigator suspension:

Posted on Jun 11, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1998 lincoln town car daytime running lights not working

do a continuity test with multimeter on bulbs if you hear a bleeping you know bulbs are fine so then I would check wiring you may have a loose connection.

Apr 12, 2016 | 1998 Lincoln Town Car

1 Answer

How to replace lincoln town car 1998 tail lights

You must pull back the trunk lining and then remove the plastic nuts that reatain the entire light assembly to the car, move it back abnd then replace bulbs. This is outlined in the factory owners manual i believe.

Sep 06, 2012 | 1998 Lincoln Town Car

1 Answer

1998 Lincoln town car parking light is not working

either your bulbs or the switch if all other lights work

May 12, 2012 | 1998 Lincoln Town Car

2 Answers


If the hight mount brake light is working , then your switches , fuses , relays , are OK . Most likely problem is that the bulbs themselves are burnt out , or there is a broken or loose wire.

Feb 02, 2011 | 1998 Lincoln Town Car

1 Answer

Tail lights out, but breaks lights work

Some tail lights/brake lights have duel filaments. Meaning they use the same bulb for both functions try changing the bulbs.

Aug 27, 2010 | 1998 Lincoln Town Car

1 Answer

Head light burned out need to find how to change

open the hood; the bulb is screwed into the back of the headlight assy

Jun 27, 2010 | 1998 Lincoln Town Car

1 Answer

My 98 lincoln town car, brake lights and blinkers stopped working I checked all the fuses and they are good. where do I go from here?

check the bulbs. These two circuits are also controlled bt the turn signal control or pass through it. do your front lamps come on but not flash?

Jun 15, 2009 | 1998 Lincoln Town Car

Not finding what you are looking for?

Open Questions:

0 Answers

98 Lincoln TC,Cold starts fine ,runs good until warm, then shuts off. No codes,Cranks ok, have spark, PATS ok. No fuel pressure, cant hear fuel pump prime,New Fuel relay. jumped fuel pump - works. I do not hear fuel pump prime up, do not have fuel gauge, but pressing on valve in fuel rail- no pressurized fuel. Fuel regulator seems ok, not leaking / vacuum line dry as a bone. If I let it set for 15 min , it will start up again, but for a few minutes then dies out. If I let it set overnight it starts up perfectly and runs until operating temp is reached then stalls/stumbles, and shuts down. Vacuum is good while cranking, even with no start, Checked Inertia switch in trunk, it is not tripped. I have seen Ford TSB summaries' that mention issues like this , but I am not able to see to description. A point to add, the MAF sensor was cleaned, then I decided to replace it and did not make a difference. I do not have any stored codes, and the PATS is working fine, typical 2 second flash from and once key is inserted a 3 second steady light, then disappears. I have seen the TSB mentioning C103 Connector, it looks fine, I swapped out fuel pump relay with ac relay, still no difference.mention of wires around battery, do not know where to start. in dash service engine light and odometer is normal, seen other posts the say they only have lines, but mine is ok. the start of all of this , I washed engine with regular garden hose, ( not using pressure washer).also in the mean time, rear window defroster stopped working as well, can not say for same reason, but a mention.My problem started after washing engine. this is one of four Panther platform vehicles I owned with exact 4.6l w code engine, which I rinced down before. The only sensor I can think of is Oil pressure , or a corroded wire

Feb 27, 2017 | 1998 Lincoln Town Car

See all 1998 Lincoln Town Car Questions

1998 Lincoln Town Car Logo

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts


Level 3 Expert

79024 Answers


Level 3 Expert

5676 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides