At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the cam sensor on the vortec engines are just a three wire pickup located underneath the distributor rotor need a t10 and a t15 torque bit usually the pick up module also has to torque bit screws in it same size
Check your battery connection's, if when it clicks one time do the lights go off?Then more then likely bad battery connection.With light switch on move battery connection if lights come on you found your problem.
cartrigde type is locted at the top of the crossmember just forward of the gas tank on driver side of the vehicle,,,,,,,,non cartradge type located on front of the fuel tank..
look under the hood on the right side where your brake fluid is..There is a black box to the farest right of the brake fluid. take off the lid to this box were you will find fuses..Reach in and feel the fuses to see if any are loose.The largest fuses in the front, push down on those and then try to start it up..Take them out look at them make sure there ok if this dont work..they the one bad might need to be replaced..
Looking for a user manual for the Regency Conversion Van
THE LOCATION OF THE ICM
×