Question about 1994 Ford Taurus

2 Answers

Corner light continued...

I have replaced the headlight bulbs on my car, but I can't figure out how to remove the bulbs on my corner lights so that I can replace them. How do I replace the front corner light bulbs on my 1994 Ford Taurus GL? Um I was able to get to my headlight from under the hood of the car. Are you saying I have to get underneath my car even though I can see the connection from under the hood? I just don't know what I need to remove the bulb, nor do I know how to remove the bulb. The headlights were obvious and simple... all I had to do was unscrew the back washer and they practicaly popped out.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What I did first was remove the headlight assembly.this is easy to do
1. remove the 3 holding clip that hold the headlight unit to your header, this is the frame.
2. carefully disconnect the headlight bulbs from the unit, not touching the bulbs itself.
3. you can not gain access to the courner light and it is just a simple twist of the bulb to remove it from the unit.
4. pull the little light bulb from the unit and carefully replace the bulb
5. reattach all the parts back.

this is very simple and easy it will not take you that lond to do either since you are only replacing the bulbs and not the assembly

Posted on Mar 12, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Get Quality Corner Lights from USA Parts.

Posted on Dec 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlight


open hood and locate light assembly. Remove light bulb conection. Take off the four bolts in each corner and remove assembly and replace as necessary.

Feb 11, 2013 | 2000 Toyota Camry

2 Answers

How to remove headlight


I presume that you are replacing the bulb, typically the ENTIRE headlight with 3 or 4 bolts. NONE of which do any adjusting...then the whole thing comes out for easy bulb replacement. DO NOT TOUCH the glass of the replacement bulb.

Jun 22, 2010 | 2004 Jeep Grand Cherokee

1 Answer

How do you properly remove cover to change


The directions for changing the headlight light bulb in all cars are near to same . but all car models are not the exact same, so there may be a few differences based on your particular car. But this.instructions may properly guide you about the directions to replace the head light bulb in your car.
The instructions are as follows :----
1) First of all open the hood of your car and put a spot light or flash light onto the back of the headlight. Look towards the far corner side of the hood, the headlight is located in a space mounted to the far sides.
2) In some of the car models there is a back cover for which you will require a screwdriver to unscrew the back plate to reach to the bulb. properly locate the screws and unscrew the screws using the proper size screwdriver.
3) Then remove the back plate.

Note: In some car models there will be a wiring component connected usually by plastic clips, so detach the plastic clips and then pull wiring to the side. Then remove the back plate.

1) Remove the Old Light bulb which will be easily visible. Then remove old light bulb by screwing it to the left slowly and carefully.
2) You can get the new light bulb from local auto store and purchase the bulb exactly that matches the one your car model .
3) Then insert the new light bulb in reverse by screwing to the right, and secure in place confirm bulb is properly connected and fitted and not remained loose.
4) To test whether the bulb is properly connected. Just try turning on headlights and make sure it lights up.

5) Then plug wiring component back in if your model has that.Then put backplate back in place , then insert the screws back in and screw in with screw driver tightly.
6) Then close the hood properly and check out head light again.it will work properly.
That means your work is done.
This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

Feb 20, 2010 | 1996 Mercedes-Benz C-Class

1 Answer

How do I replace the passenger side corner light and front side turn signal light?


Front Turn Signal & Parking Lights


7ccc73e.gif
Remove the 2 parking light housing retaining screws ...


9898a80.gif
... then pull the housing away from the vehicle far enough to remove the bulb socket from behind the housing. Turn the socket counterclockwise and pull


a323ae9.gif
Push the bulb in the socket gently and turn clockwise, then pull the bulb out of the socket. Note the offset retaining ears on each side of the bulb


  1. Remove the screws from the lens and separate the lens from the headlight bezel.
  2. Remove the headlight bezel.
  3. Remove the screws from the turn signal housing and pull it out.
  4. Turn the bulb socket counterclockwise 1/3 turn and remove it.
  5. Installation is the reverse of removal.


Side Marker Lights
  1. Remove the screws from the marker lens and separate the lens from the headlight bezel.
  2. Pull the bulb from its socket in the back of the lens.
  3. Installation is the reverse of removal.

Feb 14, 2010 | 1997 Jeep Grand Cherokee

1 Answer

How do I replace a passenger side corner assembly headlight


If you're referring to the corner parking light, which get dinged very frequently, here's how you do it.

Open the hood. Near the corner there is a wide head philips head screw holding down the corner light bracket. Remove the screw. The light should now be loose. Slide it forward to remove. The bulb socket will be attached to the light. Twist it to detach.

Frank
Frank's Friendly Cars Maui Car Rental

www.MauiCarRental.biz

Aug 02, 2009 | 1995 Toyota Corolla

2 Answers

How do I remove headlight cover in Subaru 1998 brighton wagon?


THE HEADLIGHTS ARE A SEALED ASSEMBLY. YOU WILL NEED TO REMOVE THE COMPLETE HEADLAMP TO ACCESS THE BULBS.

Dec 18, 2008 | 1998 Subaru Legacy

1 Answer

Right blinker


THIS IS IN the corner lamp next to headlight correct? open hood you will see a screw where corner light mounts to headlight. remove screw and light will come out so you can change bulb. it is clipped into fender

Dec 10, 2008 | 2005 Chevrolet Venture

1 Answer

Replacing Corner Lights on a 1994 Ford Taurus


U get at them from under the car.

Dec 09, 2008 | 1994 Ford Taurus

1 Answer

How to replace headlight on a 2003 Chevy Tracker


There are two black plastic clips behind the the air filter, remove them and release the whole assembly to access the lights.

If you still get in troubles, have it replaced at a petrol station, they will help you in fitting the bulb, and it won't be expensive.


Here follows
2003 Chevrolet Tracker Light Bulb Size Chart
Low Beam Headlight Bulb Size: 9003/HB2
High Beam Headlamp Light Bulb Size: 9003/HB2
Parking Light Bulb Size: 1157A
Front Turn Signal Light Bulb Size: 1157A
Rear Turn Signal Light Bulb Size: 921
Tail Light Bulb Size: 7443
Stop Light Bulb Size: 7443
High Mount Stop Light Bulb Size: 168 Or 921
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 921
Front Sidemarker Light Bulb Size: 194
Ash Tray Light Bulb Size: 74
Step/Courtesy Light Bulb Size: 168
Trunk/Cargo Area Light Bulb Size: 168
Instrument-General Light Bulb Size: 158 or 74
Check Engine Indicator Light Bulb Size: 74
Hi-Beam Indicator Light Bulb Size: 74
Seat Belt Indicator Light Bulb Size: 74
Brake Warning Light Bulb Size: 74
Automatic Transmission Indicator Light Bulb Size: 74
Directional Signal Indicator Light Bulb Size: 74

Oct 02, 2008 | 2003 Chevrolet Tracker

Not finding what you are looking for?
1994 Ford Taurus Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...