I am trying to find the correct wing mirror switch its the sliding switch which changers which side mirror you are adjusting,
my van is a 1995 chevy astro tiara,
this switch is in a unit located on the top of the dash near the drivers seat,its in a 3"x 2" unit with 2 switches in it one part is made up with 4 triangles which changers the mirrors up down left and right the other part is the part i am looking for in grey colour
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Wing mirrors have a certain range of electrical adjustment. Manual adjustment by pushing with fingers can make electrical adjustment inoperative. The solution is to make finger adjustment to get back to the electrical range.
your mirror control switch has 9 wires.,your drivers door mirror has 5 wires color coded .from your mirror control switch to your drivers siide mirror / 0.5 black .0.5 brown. 0.5 brown. 0.5 black. 0.5 black. your passenger mirror wires are 0.5 blue/black .0.5 blue/grey. 0.5 blue/white. the passenger mirror has a ground cable 0.5 brown. the passenger mirror wire 0.5 green/white connects to a 5amp fuse/F25 onto F31 5amp to a wire 0.75 green/yellow.back to the mirror control switch.
Check this guide as reference for solve ypur problem; this is one DIY about replace Wing Mirror... 1.- Disconnect your negative battery cable, if your Ford Focus has power side mirrors. If it has manual side mirrors, disconnecting the battery is unnecessary. 2.- Pry off the wing mirror's inside sail panel (shaped like a triangle). Insert a trim panel tool between the door skin and the plastic panel to pry it off. 3.- Carefully pull the sail panel away, minding the wiring if the mirror is power-operated. Unplug the electrical harness and set the panel aside. 4.- Open the door and hold the outside part of the wing mirror steady. Remove the mounting bolt with a socket wrench, and then remove the mirror screw with a Phillips screwdriver (the mirror bolt and screw is visible with the panel removed). 5.- Pull the wing mirror assembly from its mount (from the outside). Insert the replacement mirror assembly in place; tighten the bolt and the screw. 6.- Attach the wiring connection to the replacement mirror. Position the sail panel in place and push it against the door to snap it back on.
Hope helps (remember comment and rated this). TY for using Fixya.
Hi.. It was an Avensis not a camry. Unfortunately the Avenssi was not on the drop down list.
Basically The bits on the back of the galss mirror did not seem to match up with the backplate. After trying several different ways I did the following.
1. remove the black casing this leaves a cover with several holes in it.
2 slide the lugs on the mirror furthest away from the door into the slot just to the left of the round circular backplte.
3 put a screwdriver through the rear housing hole near to the door. If you look through you will see a "lug sitting on a black lip. Use the screwdriver to force the lip away from the car. the lug will slip down the side of it. release the lip and it will secure the mirror.
Note the mirror does not seem to fit 100% correctly so I've added some tape for extra security.
your mirror control switch has 9 wires.,your drivers door mirror has 5 wires color coded .from your mirror control switch to your drivers siide mirror / 0.5 black .0.5 brown. 0.5 brown. 0.5 black. 0.5 black.
your passenger mirror wires are 0.5 blue/black .0.5 blue/grey. 0.5 blue/white. the passenger mirror has a ground cable 0.5 brown.
the passenger mirror wire 0.5 green/white connects to a 5amp fuse/F25 onto F31 5amp to a wire 0.75 green/yellow.back to the mirror control switch.