Question about 2004 Chrysler Voyager

2 Answers

How to replace headlight bulb in Chrysler Voyager rhs 2004

Is there any simple instructions on how to open the headlight assembly?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 169 Answers

You shouldn't have to open the reflector assembly. At the place where the wires go into the assembly should be the headlamp socket which is removed by turning a quarter turn and then pulling straight out.

Hope this gets it for you,
Carl

Posted on Dec 09, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 70,387 Answers

  1. Open up the hood, and look at the areas above the headlamp and in front of the battery.
  2. You should be able to locate 3 hex headed bolts, with screw slots (so you can turn them with a spanner or a flat blade screw driver). They are about 8mm in diameter. Oh 8mm is about 1/4 inch.
  3. Undo all three completely and place somewhere safe, the headlamp unit will become loose.
  4. Prise it out gently so as not to damage it.
  5. On the back of the headlamp you'll see a number of plastic push fit "Tupperware" covers. Pull the one of behind the bulb that you need to replace and the back of the bulb is revealed.
  6. Easy!
  7. Reassembly is he reverse process.

Posted on Dec 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to see a diagram on how to replace headlight harness connector that is located inside the headlight on 2004 chrysler crossfire


Pull the rubber dust cover back you will see the electrical wires going to the bulb you can pull the old connector off from there it is not inside the housing, the bulb is held in by a small spring clip at the back of the bulb socket.

Sep 06, 2014 | 2004 Chrysler Crossfire

1 Answer

How do you replace the Drivers Side Headlight (bulb?) for 1998 Chrysler LeBaron (there is a coolant reservoir right behind the light assembly under the hood :(


Raise the hood and look at the headlight assembly from the top, you should see a couple of pins to remove and pull them up...the headlight assembly should come out. then just remove the plug and replace the bulb

May 26, 2014 | 2004 Chrysler Crossfire

1 Answer

I'm having a problem removing the headlight assembly from my 2004 chrysler crossfire, i've removed the 2 screws from the top and removed 1 from below through the wheel well, are there two screws...


Last I checked Chrysler had changed it's headlight mounting from external screws to just the two adjusting screws. Looking down from the top, you should be able to see two Torx head screws that are used to adjust the headlight assembly. The remove teh head light assembly you remove those and the assembly should come right out. Both of these screws or adjusters will be 6 to 8 inches long. I hope your not removing this to change the headlight it self. Chrysler has been using the insert bulbs for several generations and to replace the bulb you only have to unlock the collar on the back of the light assembly and pull and then replace the bulb.

May 14, 2011 | 2004 Chrysler Crossfire

2 Answers

Trying to change headlight bulb


Hello,

The 2004 grand prix pontiac houses 2 headlight bulbs per headlight assembly. The low beam headlight are located at the fender of the car and the high beam on the grill side of the assembly.

To replace the headlight bulb of Your pontiac grand prix, 2004 model. It is qiute technical and moderately easy to fix. There is no solution that cannot be done the DIY way, as long as You get the proper guide and You are technically able to do such works.
  1. Park the Grand Prix on a flat surface, apply the parking brake and ensure both the engine and headlight switches are off.
  2. Open the hood and approach the headlight assembly with the faulty headlight bulb.
  3. Locate the headlight assembly retaining clip. It's behind the headlight assembly on top on the fender side. Lift the clip upward halfway to release the headlight assembly.
  4. Pull the assembly out being careful not to scratch the paint on the fender or the lens of the assembly.
  5. Reach behind the assembly and disconnect the wire connection and plug from the headlight bulb socket.
  6. Turn the socket of the bulb counterclockwise 1/4-turn to remove the composite bulb from the assembly. Discard the bulb.
  7. Install the replacement bulb into the assembly (handling the plastic socket part only oil in skin will damage the glass bulb of halogen bulbs because of the intense heat they burn at), but ensure the tabs of the socket end of the bulb are aligned with the notches in the assembly before turning it clockwise and locking the bulb into place.
  8. Plug the wire connection back into the socket of the bulb before replacing the assembly back into place and pushing down on the retaining clip. Test the headlight bulb for operation before closing the hood.
Hope this was helpful. Thank You for using FixYa!!!

Jan 15, 2011 | 2004 Pontiac Grand Prix

1 Answer

Passenger side headlight assembly removal, is there more than 2 bolts, if so where


You can replace the headlights on your Crossfire easily by yourself. headlight image by Carbonbrain from Fotolia.com

When a headlight burns out on your Chrysler Crossfire, you do not need to rush to the repair shop to have it replaced. You can access the headlights in your Crossfire from within the engine compartment, allowing you to change the headlight yourself. The Crossfire uses an H7U headlight bulb, which you can find at auto parts retail stores or at a Chrysler dealership.
Difficulty: Easy

  1. 1 Open the hood of your Crossfire to gain access to the headlight assemblies. Press down on the tab on top of the light assembly cover. Remove the cover and set it aside.
  2. 2 Pull the electrical connection free of the bulb socket. Press the spring clamps securing the bulb into the light assembly. Pull the bulb straight out of position.
  3. 3 Insert the new bulb in the same position. Ensure that the spring clamps secure the bulb. Press the electrical connection into place.
  4. 4 Replace the light assembly cover and press it into position until it clicks, securing it in place. Repeat the same process on the opposite headlight if required. Close the hood and test the headlight operation.



Dec 12, 2010 | 2004 Chrysler Crossfire

1 Answer

Need to replace headlight?


  • Open the hood of your Crossfire to gain access to the headlight assemblies. Press down on the tab on top of the light assembly cover. Remove the cover and set it aside.
  • 2 Pull the electrical connection free of the bulb socket. Press the spring clamps securing the bulb into the light assembly. Pull the bulb straight out of position.
  • 3 Insert the new bulb in the same position. Ensure that the spring clamps secure the bulb. Press the electrical connection into place.
  • 4 Replace the light assembly cover and press it into position until it clicks, securing it in place. Repeat the same process on the opposite headlight if required. Close the hood and test the headlight I would replace them both sides if i were you
  • Dec 02, 2010 | 2004 Chrysler Crossfire

    1 Answer

    Is there a headlight wiring loom for a chrysler voyager, or do I have to replace the entire headlight unit


    Loom? The 1990 Models were mixed. Before that the whole head light was replaced. In the 2000 year models you need to locate the collar on the back of the head light, turn it counter clockwise and remove the bulb from the headlight assembly. Unplug bulb and replace then reverse the process to install. If you use the little machine that Walmart usually keep near the replacement bulbs in the Automotive section you can get verification of what type you have if your not sure. You will need to know the Year and model of your vehicle.

    Oct 15, 2010 | Chrysler Voyager Cars & Trucks

    1 Answer

    How do I change the Driver's side Front Headlight on the 1998 Plymouth Grand Voyager?


    1. Unscrew the three screws that secure the headlight assembly to your Dodge Caravan. Put the screws in your pocket or another safe place, so you won't lose them before reinstalling the headlight assembly.
    2. Pull the headlight assembly away from the front of the vehicle. Turn the bulb retaining ring counterclockwise to unlock the electrical connector. Remove the electrical connector from the bulb assembly by pulling it straight out.
    3. Replace the old bulb with a new halogen headlight bulb. Connect the electrical connector and turn the bulb retaining ring clockwise to lock the bulb into place.
    4. Reinstall the headlight assembly and secure the screws tightly before closing the hood. Turn on your Dodge Caravan, flip on the headlights and verify they're working properly.

    Oct 16, 2009 | 1998 Plymouth Grand Voyager

    1 Answer

    Changing headlight 300m


    lift the hood. the light are down behind the light assembly. simply turn large black ring and it will come out. be carefull not to touch the glass on the new one. oil from your skin will cause it to prematurely fail.

    Mar 11, 2009 | 2004 Chrysler 300M

    2 Answers

    1999 plymouth grand voyager headlight.. How does one see the road at night when the liht covers can't be cleaned to let out the light?


    Replace the headlight assembly. Aftermarket headlight assemblies sell for about $60 to $70. Upgrade your bulbs to brighter, whiter lamps to increase visibility.

    Aug 04, 2008 | 2004 Chrysler Voyager

    Not finding what you are looking for?
    2004 Chrysler Voyager Logo

    Related Topics:

    92 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chrysler Experts

    yadayada
    yadayada

    Level 3 Expert

    70374 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22041 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6878 Answers

    Are you a Chrysler Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...