Question about 1998 Volkswagen Cabrio
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The fuel lines are pressurized so you will need to relieve the pressure before you try and remove the filter or you will get a face full of gas. The filter comes off by pushing the fuel line toward the filter and then pushing the quick release button on the fuel line. The fuel line should then decouple - the filter lives under the car near the right rear tire (just in front) Good luck and be careful
Posted on Jun 09, 2009
check your timeing belt frist . then check your fuel pump.and check your fuelter then check your fuese. 9 time out of 10 when a car die on you while driving its your timeing belt
Posted on Apr 05, 2009
THis is common Too common. As I posted before.
As I posted in the Passat questions.
The jetta may slightly differ.
Yes. If your window has fallen down and will not roll up.
99% Chance you car is suffering the Infamous VW plastic clip.
The door panel comes off With a T-10 torx or a Hex (Allen) wrench
that will fit and A large Philips Screw Driver..
Remove the Plastic cover on the inside Door handle.
And the Screw or Screw along the Bottom of the door panel.
Then remove the screws that hold the handle the the door.
They are located behind the Plastic plate you removed with a tiny screw driver earlier... Be careful not the mark up the cover whaytprying it up. It is best to pry from underneath. Where marks if made can not be seen
After the screws are out 4 I believe. The Use of a CLip tool ir best.
For getting behind the panel to pop it off. A screw driver will work.
After all the clips are released. Pull the light at the bottom of the panel down and out. Disconnect it ur push it back thought the hole it came from..
Now you need a 10mm socket, or wrench to remove the 12 bolts that hold the metal plate to the Door. Remove all the 10mm bolts, If the widow has not already fallen in the door. It should be released. By removing the Black 2" plugs. THe loosen the bolts that clamp the window the the arms. DO NOT LOOSEN THEM ALL the way, .
Disconect the all the wiring.. THe Door lock cable,can be a pain.
I think it pulls down,.
Next remove the Metal plate. that is the regulator.
reverse to install
Posted on Jun 26, 2009
Tips for a great answer:
Aug 28, 2011 | 1998 Volkswagen Cabrio
Dec 21, 2010 | Volkswagen Golf Cars & Trucks
Aug 23, 2010 | 1998 Volkswagen Cabrio
Jun 30, 2010 | 1998 Volkswagen Cabrio
Jun 04, 2010 | 1999 Volkswagen Cabrio
Apr 07, 2010 | 1998 Volkswagen Cabrio
Feb 22, 2010 | 2001 Volkswagen Cabrio
Jul 14, 2009 | 1995 Volkswagen Cabrio
Apr 05, 2009 | 1998 Volkswagen Cabrio
906 people viewed this question
Usually answered in minutes!