Question about Jaguar S-Type

1 Answer

My dash lights on the speed o and the lights on the steering wheel cruise and radio the reset button do not work

Posted by on

  • JoyAnnV Dec 10, 2008

    I have the same problem. My mechanic replaced the fuse and the dash lights worked until I turned on my rear window defroster and/or my radio.

  • Anonymous Jan 10, 2009

    I have a problem with my gps dash express.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 275 Answers

Check the fuses

Posted on Dec 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cruise controlnot working


Do you have an airbag light lit ? Are your cruise control buttons on the steering wheel . If so the clock spring could have an open circuit. A clock spring is a part inside the steering column , under the steering wheel . Check out this video on clock spring .
https://youtu.be/4jv2DW39drA if no airbag light ,then probably not this part.

Nov 23, 2015 | 2004 Chevrolet TrailBlazer

1 Answer

MY LOW BEAM LIGHTS, BREAK LIGHTS AND RADIO SOUND CONTROL ON STEERING WHEEL, ALL STOPPED WOKING


Steering wheel radio controls and horn not working - Jeep Wrangler ...

www.wranglerforum.com/.../steering-wheel-radio-controls-and-horn-not...

Sep 22, 2014 - 12 posts - ‎6 authors
... 2Dr sport and my step/reset buttons, radio control and horn all stopped working. ... Also the lights behind the step/reset and cruise control went out, but the ... Soundslike a bad clock spring ribbon cable in the steering wheel. steering wheel buttons not working
30 posts
Jun 14, 2012
Steering wheel audio controls
30 posts
Mar 5, 2011
More results from www.wranglerforum.com

Nov 23, 2015 | Cars & Trucks

1 Answer

How can i activate my cruise control in my 2004 grand cherokee


The cruise control switches are located on the steering wheel. When the cruise control is turned on there will be a green light luminated on the dash that says "cruise". When at the desired speed press "set" to set the cruise control at that speed.

Oct 09, 2010 | Jeep Cherokee Cars & Trucks

1 Answer

1998 forester cruise does not engage


ther is a clock spring switch in the steering wheel to enable a continious connection the buttens and the unit the problem may lie there

Apr 12, 2010 | 1998 Subaru Forester

1 Answer

How do you use cruise control?


Should be a operater manual with car, if not, the left side of steering wheel is a small handle. On the end is a button. In the middle is a "resume" switch that is pussed with your thumb. While driving push the end button, the car should engage and power without your foot on the peddle. To go faster push the middle switch with your thumb toward steering wheel and that will increase the speed. When you put on the brake the cruise control should dis-engage. Need to practice with this on a safe road. You may need to go at least 40mph for it to operate. When the cruise is engaged a dash light should come on saying "cruise" - Good luck

Oct 15, 2009 | 2002 Chevrolet Cavalier Coupe

1 Answer

I have a 2008 Honda CRV and for the life of me I cannot engage the Cruise control- I press the Cruise Button on the right of the steer wheel and nothing happens - nothing Help anyone ? Tks Nancy


The cruise-controls have 2-buttons that must be activated before it gets the car going when you remove your foot off the gas-pedal.
The cruise button is essentailly a switch that turns 'on' the cruise servo-motor that tells the sytems that you wants to use it, so it gets ready.
There are other three switches on the right-side of the steering wheel namely: resume accel; cancel; set decel.
To get your car to cruise: you must steady your speed and foot on the gas-pedal. You cannot just press the switches and expect the car to cruise. It takes about two-to-three seconds for the system to respond to a set cruising speed.
How to do it: accelerate to a speed of about 30-mph. Press the 'cruise' button on the dash first. Next you press 'set decel' button. This will turn 'on' the cruise control light on the instrument panel. Then wait a second or three and you would feel the cruise engagement. Any touch on the brake pedal will slow down the car and turns the cruise off. The 'cancel' button turns off the cruise light on the instrument panel.
If you hit the brake-pedal at any time for any reason, and you would like to continue cruising again, simply press the 'resume accel' button.
The cruise system works in conjunction with the braking system of the car. So all major parts of the braking system must be in good condition, otherwise the cruise system could shut off itself.





Sep 28, 2009 | Honda CR-V Cars & Trucks

1 Answer

How to set cruise control


Look for a button on the steering wheel that has a symbol of a windsheild wiper with dotted lines. Once you press the button you will see the cruise light come on. The light should be on the right side of the dash console. Set your cruise to desired speed.


John

May 23, 2009 | 2004 Chevrolet Malibu Maxx

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Raygin
Raygin

Level 2 Expert

322 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...