Question about Saturn SL2

1 Answer

94 saturn door panel removel - SL2 Saturn Cars & Trucks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Saturn Master
  • 64,286 Answers

Well, first you have to remove the outside door panel. To do this remove the door handle on the out side. Lift up the handle and look underneath. You will see 2 little round pins sticking in the handle. Take a small punch and push them up. The handle slides to one side and then off.
Next you need a torx wrench to remove the 10 panel bolts located inside the door frame. I think it is a 40 torx.
Once they are removed you can lift up on the door panel and remove. You can't get access anyother way. Inside door cover can only be remove by removing the outside panel and
taking the clips off. So, once you have the outter door panel off you will the workings. You will need a flash light. Check the throw arm that attaches the locking switch on the lock to the door latch assembly. More then likly that is all that came loose. If that is ok then you need to replace the door catch assembly. Not an easy project. If you can do it the part is about $50 from the dealer. You will need to remove the 3 torx screws attaching the assembly to the inside door frame. Disconnect all the clips that attach the arms. Installation is the reverse. NOT AN EASY JOB TO DO. Plan on a whole day to figure all this out.

Posted on Dec 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why do I have to pop the clutch to shut off the engine 94 saturn 2 door 5 spd manual twin cam


faulty ignition key or relay
have it checked by an accredited auto electrician or service center

Oct 20, 2016 | Saturn Cars & Trucks

1 Answer

Removel of door panel


You will need to remove the outside panel to service the window or window regulator or the window motor. The outer panel is held in place with a dozen or so bolts that a male torx socket is needed to remove. You will first remove the trim piece that is on the upper back of the outside of the door, two screws. Then remove the window seal on the outside of the window. Then remove the outer door handle. Then remove the torx bolts and lift up on the door skin, you may have to wiggle a little to get it to pop.

The video is for an S-Series but the principal is the same. Good luck!

Apr 19, 2014 | 2003 Saturn VUE

1 Answer

Saturn will not start


after change the door on 94 saturn driver side car refuse to start what is cause?

Jan 04, 2014 | Chevrolet Cars & Trucks

1 Answer

Remove door panel


Go To Autozone You Can Rent The Tool For About 10.00 Deposit It Looks Like A Fork And Called Door Panel Removel Tool

May 15, 2013 | 1996 Pontiac Sunfire

1 Answer

2000 Silvarodo 2500 extended cab rear door pannel removel?


they have alot of hiden screws if it has a speeker in the door panel take the cover of there might be screws under it then look at the bottom of the door panel there might be screws at botom under the door panel

Nov 21, 2010 | 2000 Chevrolet Silverado

1 Answer

How to open the door frame of a 94 Saturn SL1, my window is off track and am trying to fix it but cant seem to get the door apart all the way


Start by removing the front door rear view mirror interior cosmetic piece.
Remove the 3 large nuts holding the mirror on and take it off the car.
Lift the door handle up and push the two small handle retaining pins out, take off the door handle. Unscrew all the bolts holding the door panel onto the frame, special driver needed. Lift the door panel up and away from the door. Reinstall in reverse order. If you are doing a back door, omit the mirror part.

Jul 20, 2010 | 1994 Saturn Sl

1 Answer

Get rear interior door panel off , want 2 bang dent out of exterior door


you have screws to remove then you have plastic clips to take off you need a removel tool for clips

Nov 20, 2009 | 2004 Pontiac Grand Prix

1 Answer

How do i remove the driver side door panel? i have a 94 saturn sl2.


There are two plastic slip pins that on the handle that will require a small pick to knock them out with. They will come out either pushing them towards the front of the vehicle or if you are pushing them out towards the back fender direction. Make sure that you aren't in gravel or grass since these pins need to go back in and are easily lost. After that, there are torx screw on the inside of the door. When you have removed all of them the skin of the door will remove from the outside.

Jun 25, 2009 | 1994 Saturn Sl

1 Answer

1997 SL Saturn Headliner Removel


search google for the saturn fourms they had detailed instructions with pics . The short answer is all plastic trim around the top or doors from the windshield to the back window. The top of the dash needs to come off too It just pops off pretty easy . all clips you can see when the trim is pulled back a bit from the bottom and use a screwdriver to pry the clip out or it will break . you need a star wrench set to remove the setbelt bolts. the passenger handle is a pain I cant remember that one .

Feb 20, 2009 | 1997 Saturn SL

1 Answer

Fusion door panel removel


There is a fastener behind a circle looking plug behind the inside door handle. Take a small flat screwdriver and pop it off. It will be a torx. The same as the other screws on the door panel. After removing all fasteners start with the bottom of the panel and get your fingers between the panel and pry ou there will be door fasteners that will pop releasing the door. Do this carefully.

Nov 08, 2008 | 2008 Ford Fusion

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...