Question about 2004 GMC Envoy

1 Answer

The power seats and seat heater quit working in my 2004 Envoy. I replaced the circuit breaker located under the back seat which was HOT to the touch. The new one got HOT as well and did not alieviate the problem. Any Ideas?

Posted by on

  • bill720 Dec 09, 2008

    How do I replace the seat heating element?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • GMC Master
  • 77,499 Answers

One of the seat heating elements is shorted, that is why the hot breaker.

Posted on Dec 09, 2008

  • yadayada
    yadayada Dec 09, 2008

    U have to remove the seat cover, this is best left to a trim shop, there are all kinds of hog rings (that is what upholstery retainers are called) that retain the seat cover, unless u have done this before it is a bear, if not nearly imposs for the novice.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse for heated seat 2004 GMC Envoy


Rear fuse box , under left back seat ! SEATS circuit breaker B 30amp .
https://www.youtube.com/watch?v=Fhd2DPbTjeE&t=86s

Dec 12, 2016 | GMC Cars & Trucks

1 Answer

2004 Envoy XUV heated seats do not work on both sides. I press the button and the lights come on, when i release the button the lights go out. I checked the fuses mentioned in the articles on this site but...


If other functions such as window controls and power seat controls are normal, here are some possibilities;
1) Circuit Breaker #8 in rear fuse panel
2) Defective Driver Memory Seat Module (under driver's seat)
3) Break in data lines between Driver's Memory Seat Module and Drivers Door Module
4) Fuse 23 & 6 in rear fuse panel

Nov 13, 2012 | 2004 GMC Envoy

1 Answer

Where is the fuse for seat heater


Circuit breaker #8 is located in the rear fuse panel under the rear seat, there is also fuse #19 for the controls.

Jun 02, 2012 | 2004 GMC Envoy

1 Answer

My seats quit moving and I checked my fuses the circuit breaker for the power seats was very very hot...So i ordered another circuit breaker and when it came in I installed it. It was working fine..then...


I would have this checked out by a trained technician or your likely to cause a fire. these seats do go bad over time and most can't be fixed they need replaced.

Dec 05, 2010 | Chevrolet Chevy Cars & Trucks

1 Answer

My 2004 gmc envoy seat heaters do not work. There is no power to the switches as neither driver or passenger lights come on when buttons are pushed. What could the problem be. I could not identify the fuse...


Check Fuse #8 in the rear underseat fuse box, this fuse is also used for the power seats. The problem could also be the heater control module (located under driver's seat), a broken wire in the harness or loose connector under the seat. If it is not the fuse, then you will have to remove the driver's seat to check things out.

Nov 24, 2010 | 2004 GMC Envoy

1 Answer

My power seat stopped working in my 2003 Yukon XL. The heated seats stopped working as well.


Try this remove the ckt breaker for the power seats the ckt breaker is located in the fuse box inside down by the drivers left foot. leave breaker out for about 10 seconds then reinstall it and see if the seat starts moving. If it does there is a reprogram for this and needs to be done by a dealer or someone who has access to be able to reprogram your vech.
several things could cause your heated seats to not work. If the seat and heated seat seat stopped at the same time could be the reprogram could fix it. If the heated seat quit working at a differant time it could be the seat heater element. get a schematic of the heated seat and ohm the wires for the element. If either element tests open then the element will need to be replaced. You might as well replace both of them at the same time since the seat covers have to come off to replace the seat heaters.(back and bottom ) If one element is bad then both heaters quit working.

Feb 20, 2010 | 2003 GMC Yukon XL

1 Answer

I have a 2005 gmc envoy and the driver seat gets hot


There may be a stuck relay Stuck in the "On" position. A relay is a remote switch that does the heavier work of a smaller or more delicate switch. It is probably under the seat but if you have "memory" seats that move the power seats back and forth it is probably the control box causing the problem. It has relays inside it.

Jun 30, 2009 | 2002 GMC Envoy

1 Answer

Power front seats


Before you start beating up thing's , test the electrical circuits. Do you know anything about automotive electrical systems ? How to use a volt meter an a wiring diagram to test for B+ power to the switch an testing the ground .
Does your envoy have memory seats ? Your vehicle has four or more electric motors to control back an foward , up an down etc.. the odds of more then one motor being bad at one time are highly unlikely .
Look under the seat any trash under there keeping it from moving ?
If you have memory seats there is a control module involved in making the seats work . If it has memory seats it could have DTC'S - diagnostic trouble codes .
DTC B1735, B1740, B1745, B1750, B1755, B1760, B1815, or B1820
The seat adjuster switches are inputs to the driver and passenger seat modules. The seat modules supply the adjuster switch assemblies with a battery positive switch supply circuit and monitor the switch signal circuits. In an inactive state the switch signal circuits are floating and when a switch is pressed the signal circuit is closed to the switch power circuit within the adjuster switch assembly. When battery voltage is present on the switch signal circuit the seat module determines the switch status to be active.
DIY Blazer GMC Jimmy Power Seat Control Diagnostics and Repair Electric...

Jun 26, 2017 | 2002 GMC Envoy

3 Answers

Gmc Envoy 2004 Seat heaters


I have the same exact problem so i would be very thankful if any know the reason

Oct 06, 2008 | 2004 GMC Envoy

Not finding what you are looking for?
2004 GMC Envoy Logo

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...