Question about 1995 GMC Sierra C1500

1 Answer

Headlight replacement 1998 GMC Sierra

How do I change the bulb on the drivers side of a 1998 GMC Sierra? I can see a clip but don't know how to remove them so I can get the new bulb in. BTW it is only 30 degrees and I want to do it quickly since I haven't a garage.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

There are two rods that slide down from the top. you have to turn to get them out of clip then pull up. once both are out then headlight can be removed.

Posted on Dec 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the rear brake light cover on 1990 GMC Sierra 2500 to change bulbs? Are there clips inside-specific places to pry it off? Thanks


seddy29732_3.jpg I hope these instructions match your model.


  1. Lower the tailgate.
  2. Remove the lamp assembly retaining screws.
  3. Pull the lamp assembly from the truck and disconnect the wiring.
  4. Remove the bulb holder fasteners.
  5. Remove the bulb(s) from the lamp.
  6. Install the bulb, connect the wiring and install the lamp.

seddy29732_4.jpgseddy29732_5.jpgseddy29732_6.jpg

Jun 03, 2011 | 1990 GMC Sierra

1 Answer

How do I change the driver's side headlight bulb in a 1997 GMC Sierra pickup


Open hood ,over headlamp assy lens there are two L shaped metal pins locked in plastic clips.Turn pin out of clips and pull them straight up,that will unlock headhamp assy so you can remove it and get to bulbs.

Dec 07, 2010 | 1997 GMC Sierra

1 Answer

How do you replace the passenger side low beam head light bulb on a GMC Sierra K 1500?


You have to reach down behind the lamp assembly and twist the back of the bulb out. It is a little tricky to reinstall. Be sure not to touch the bulb on the new lamp. The oil from your skin makes the bulb burn out prematurely.

Nov 18, 2010 | 1998 GMC Sierra

1 Answer

Turn signal bulbs, front & rear, blinking fast , 1998 GMC Sierra Short Bed


if one side is flashing faster than another then check the side that blinks fast because you have one of the bulb blown on that side

Mar 16, 2010 | 1998 GMC Sierra

1 Answer

How do I install a new rt rear turning signal light on a 1997 GMC Sierra 1500 short-bed offroad?


Lower tailgate remove two screws on side of light t15 torx or phillips remove light. middle bulb is signal.To remove bulb push release tang and turn left to remove. Good time to change all bulbs. Same on other side

Feb 05, 2010 | 1997 GMC Sierra

2 Answers

Tail lights work on both sides. turn signal and


Sounds like you need to replace the drivers brake/tail light.

Dec 14, 2009 | 1998 GMC Sierra

1 Answer

I need to change the daytime running lights on my GMC


you will see 2 pins or clips on back of headlamp asm, remove them and lamp asm pops out , now remove bulb, good luck.

Oct 24, 2009 | 2003 GMC Sierra 1500

2 Answers

Lightbulb driver side 2008gmc 3500 6.6l


how to change driver side headlight bulbs?

May 30, 2009 | 2008 GMC Sierra 3500HD 2WD

3 Answers

I need to change the brakelight on my 2001 gmc sierra?


Which Brake line are we Talking about. The one from the Master Cylinder or one from a Caliper on??????????

Jan 23, 2009 | 2001 GMC Sierra Crew Cab

7 Answers

Headlight bulb


You have to remove the air intake filter and then kind of reach around up in there to change it. It can be done, but is a lot of work. On the duramax, it is even harder to do the driver side because of the dual batteries. You have to remove the battery, then the battery seat plate, and undo the winshield washer fluid tank and lean it forward. Then you can just sort of reach in and change both headlights. A very big pain to change a couple of headlights, but if you want HID's.... for the average person, changing a headlight now means a trip to that garage.

Nov 07, 2008 | 2008 GMC Sierra 2500HD 2WD

Not finding what you are looking for?
1995 GMC Sierra C1500 Logo

1,625 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

67930 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22011 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...