- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I am a mechanic ..most people ask questions about these foreign hyundai motors ..below is an example of engines that basically if you ask about a Hyundai Xg 350 ,xg300 ..well allow me to hammer 90% of your questions in case you want to grab another motor ..these motors listed will work on 90% of all hyundai products ...Look at the starter sizes ,,all the same for the selected models ..then look at the motor sizes ..This will help you in solving some problems most do not give the specific questioning 100% NEW REPLACEMENT STARTER FOR STARTER
You will have to obtain a siphon kit from your local auto parts store and siphon the gas out of your gas tank, you will need to drop your gas tank out of your vehical, the electronic fuel pump is located inside the gas tank, the reason for removing the gas out of the tank is because of you try and remove the tank with it halfway full or full the tank will be to heavy and you run the risk of dropping it and ripping off the delivery and return lines as well as the electrical connections for the pump from the vehical, so make sure you have a way of draining the gas it will make your job much easier as far as removal of the tank is concerned......
I have exactly the same problem. Keyfob will unlock the doors, but will only arm the alarm once the doors have been locked manually. Central locking button on driver side door no longer works, but I hear the clicking sound you're referring to. I took it to a mechanic, and he seemed pretty sure it was a bad master window / door lock switch. The price he quoted to replace it was $255 plus tax, and I could never bite the bullet and pay for the work, so I've just been living with the problem. Have you solved your situation yet?
no its not the vent.it is the restrictor for the nozzle for unleaded gas.(thinner/smaller then leaded) causing a back pressure when you are filling up.sorry but you will just have to fill up slowly like i do....