Question about 1987 Dodge Pickup 2WD

1 Answer

1987 dodge pick up

Maintenance light wont go out

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 1987 Dodge pick up and I had to reset my maintenance light. There is a EMR module located behind and to the right of the glove box. Just pull in on each rear side of the glove compartment box and it will drop down. There is an EMR module located to the right of the glove box behind the dash. Use a small rod or screwdriver and insert it in the small hole of the module and reset the switch.

Posted on Mar 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The tail lights, running lights, and dash lights on my truck wont work, i have just replaced the headlight switch and they still dont work, any help please?


Mine was simple for the tail lights it was a rubber piece missing http://m.youtube.com/watch?v=Nuj9o6YdO8A&desktop_uri=%2Fwatch%3Fv%3DNuj9o6YdO8A hope this helps

Sep 28, 2013 | 1987 Dodge Dakota

2 Answers

I need the firing order for the wires to the distributor cap.


there are several engines--please pick yours.

V8-318 and 360 EnginesEngine Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Clockwise:
jturcotte_117.gif




V8-400 and 440 EnginesEngine Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Counterclockwise:
jturcotte_118.gif


V8-383 and 44 EnginesEngine Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Counterclockwise:
jturcotte_119.gif

Nov 08, 2010 | 1987 Dodge Ramcharger

1 Answer

Help please i have a 1987 dodge ram pick up that died on me on the hyway i find now there is no spark from comming out of the coil i ran a positive wire direct from the battery to the Pos. Side of the coil...


Check the ballast resistor mounted on the fire wall. It's white about 3 inches long with one screw in the middle. Use a test light and check to see if you are getting fire across both terminals. If not replace it. Fire comes from the ignition through the starter relay to the ballast resistor and then the coil. Hope this will help you.

May 20, 2010 | Cars & Trucks

1 Answer

Maintenance light on 1989 dodge caravan came on and wont go off


disconnect the battery for 10 min then reconnect battery

Mar 14, 2010 | 1989 Dodge Caravan Cargo

1 Answer

1987 dodge ram 50 pick/up rear lights not working but headlights work fine.also dash lights and radio lights are not working.


It could be a fuse? Have a look in the fuse box, your owners manual will detail where it is. Take a look at the top of each fuse to see if the thin piece of metal is burned out.

Aug 04, 2009 | 1987 Dodge Ram 50

1 Answer

1987 dodge d 150 not firing


change the battery cables,use a wire brush and clean the battery posts

Jul 27, 2009 | 1987 Dodge D150

2 Answers

1987 dodge ram van STEERING COLUMN


to whom this may concern did you find a steering column. Are you replacing it in a 1987 dodge pick-up

Apr 23, 2009 | 1987 Dodge Ram Wagon B250

1 Answer

Bolts for upper control arm assy on 1987 DODGE RAM PICK UP


Don't remember the size but they are likely grade 8 bolts not general hardware store stuff. See if you can get them from a junkyard (they usually discard them or cut off with a torch when removing control arm.

Mar 23, 2009 | 1987 Dodge Pickup 2WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...