Question about 2007 Toyota Land Cruiser

1 Answer

Maintenace light is it possible for me to turn off or reset the maintenace light without having to take it to the dealership?

Posted by on

  • dustyrosa3 Dec 09, 2008

    yes please!

  • Toyota Ed May 11, 2010

    Absolutely. Would you like the procedure?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

This may sound difficult, but it is really simple; the reset takes 30 seconds; here you go:

Get in the car.
Turn the key ON (do not start it)
Observe the odometer. Is it on ODO (total mileage driven?
If not, depress the reset stick by the speedometer from trip a or
trip b until ODO is shown, and the total mileage traveled is displayed.
Turn the key OFF
Press and HOLD the reset stick on the instrument panel (trip a/trip b button), and HOLD it until advised to release it.
Turn the key ON (do NOT start the engine)
Observe the odometer: You will see 5 dashes, 4 dashes, 3 dashes, 2 dashes, and the 1 dash, followed by 5 zeros. The total mileage you started with will be redisplayed.
You may now release the reset stick.
Start the engine, the maint light will be reset.
What procedure does: It adds 5,000 miles to your odometer, and the light will come back on in 5 K miles.
The graciousness of a FixYa rating for my assistance to you would be greatly appreciated! Thanks for choosing FixYa!

Posted on Dec 09, 2008

  • Toyota Ed Dec 09, 2008

    Please advise if the reset procedure worked out for you.

  • Toyota Ed Dec 11, 2008

    DId the reset proceedure work for you?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2005 Avalon was serviced but they didn't turn off the "maintenace required" light. Where is the switch to turn the light off?


There is not one you need to reset your car's computer, Autozone will do this for free. good luck

Apr 09, 2011 | 2005 Toyota Avalon

3 Answers

Self service on '07 Camry


You likely need the oil changed and the owners manual will tell you how to reset the the oil life warning.[maint req light]

Jun 12, 2010 | 2007 Toyota Camry

1 Answer

How do you get the maintenance required light on dash to do out after a routine maintenace tune up


This should work as it works on a Honda Accord. With the ignition off push and hold the odometer reset button while at the same time turning the ignition to the on position without starting the engine. After 5 seconds the light will reset.

Apr 30, 2010 | 2001 Honda Civic

1 Answer

How to turn off the swicht of need maintenace


I assume you are talking about resetting the light:

Turn off the engine.

Press and hold the Select/Reset knob (odometer) in the instrument panel, then turn the ignition switch to ON (II).

Hold the knob for approximately ten seconds until the indicator resets.

Hope this helps you.

Jan 01, 2010 | 2005 Honda Civic

1 Answer

Maintenace required light on how i turned it of after i did the maintenace already and light still on


Hi Guillermothe,

I'm not 100% sure on this, but I know with older vehicles the light needs to be reset. In older vehicles all you have to do is disconnect the battery for 30 minutes, reconnect and you're good to go.

But, you're driving a newer vehicle, this may effect your car alarm, or even your radio.

Hope I've helped, don't forget to rate.

Lazaruselite

Feb 24, 2009 | 2005 Nissan Frontier

2 Answers

Lexus RX350 Reset Maintenance required light


PRESS AND HOLD IN THE TRIPOMETER RESET BUTTON. WITH IT IN, TURN THE KEY TO THE ON POSITION WITHOUT STARTING THE ENGINE. THE DISPLAY WILL COUNT DOWN IN HASH MARKS FROM 6 TO 0. AFTER IT REACHES 0 RELEASE THE TRIPOMETER RESET, TURN THE KEY TO THE OFF POSITION. ONCE YOU RESTART THE LIGHT SHOULD BE OFF.

Dec 18, 2008 | 2008 Lexus Rx 350

1 Answer

Key coding a 2001 Chevy Impala


Yes! After installed, trun key on (engine not running) for 30 mins.,trun off and back on for 10mins., turn off and back on for 10 mins. more; flashing light will go off turn off and try starting engine. Good luck! it's GM's reset for that.

Oct 20, 2008 | 2005 Chevrolet Impala

3 Answers

Reset oil change indicator


after the oil was changed the maintenance light stayed on. I did this before and the Honda dealership helped me and the trip button was the part of the solution. i tried the suggestion above and it did not work.

Aug 11, 2008 | 2003 Honda CR-V

Not finding what you are looking for?
2007 Toyota Land Cruiser Logo

350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...