Question about Chevrolet Silverado 1500

1 Answer

1994 chev silverado 1/2 ton 4wd 5.7 350 automatic

I just replaced motor ,prior to that i had alot of hesistation cant get truck to drive with out feathering gas pedal cant stomp the gas acts like its flooding. new motor is timed starts with ease no noises but when put in any gear it is non responsive. help......

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have you checked to make sure the catylitic convertor isn"t plugged? Disconnect the exhaust and rev the engine is there a difference? Good Luck!

Posted on Dec 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Chev 4x4 2500; When I try to switch from 2wd to 4wd, the switch wont work. The 4wd does work, but its having a hard time switching.


either the encoder is bad or the complete encoder motor assembly. this motor and encoder is mounted on the left side of the transfer case. easy to change.
this is the most common problem with the gm electronic transfer case.

Mar 06, 2011 | 2001 Chevrolet Silverado 2500HD

1 Answer

2003 Silverado 1500 4X4 long bed. are the rear brakes dual or single piston?


4WD with 6 lug nuts should be a single piston caliper. If for some reason you have a 8 bolt pattern the caliper will be a dual piston system. These should be limited to 3/4 4WD and 1 tons.

Feb 11, 2011 | 2003 Chevrolet Silverado 1500

1 Answer

1987 Chev Suburban 350 4wd 1/2 ton. Blew head gaskets at about 340,000 miles on the engine. Removed, repaired and reinstalled top end. Fired up on first try. Runs smoother than ever before. Never had...


You said you replaced "it" but did you replace both? Something else to check is you temp sensor, (not for gauge). Should be around the thermostat housing with a 2 wire plug. Bypass it with a jumper. Hope this helps.

Oct 17, 2010 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

My 2001 silverado w/69,000 miles has no light indicating 2 or 4 h


THE TRANSFER CASE MOTOR IS NOT WORKING TO INGAGE 4 WHEEL DRIVE. CHECK WITH DOOR OPEN WHEN YOU PUSH 4 WHEEL SWITCH YOU SHOULD HEAR MOTOR INGAGE 4 WHEEL DRIVE. IF YOU HEAR MOTOR BUT STILL NO 4 WHEEL DRIVE THE GEAR ON MOTOR COULD BE DAMAGED. REPLACE TRANSFER CASE MOTOR.

Jan 08, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

Stabilizer bearing replacement 1994 chev extented cab 1/2 ton changing stabilizer bearing , how to remove properly


steering stabilizer doesn't have a bearing, can you take a picture of what you're trying to replace and I should be able to help you.

Dec 17, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

On the independent front end of my 95 3/4 ton trk. what does the ele. shift motor do?


The electric shift motor spins the front axle up to speed so you can switch to 4wd. When it goes bad you can no longer get the truck into 4wd. .

Nov 27, 2009 | 1995 Chevrolet Silverado 2500

4 Answers

Service 4WD LIGHT IS ON


I have a 2002 chevy trailblazer LT 4.2 l w/ approx 85000 miles on it and I left key in car after rolling down windows for about 2 hours drainging battery. After charging battery and running car for a little bit the service 4 wheel drive light came on. I have had no problems with the truck and I am wondering if it is because the battery was drained and the computer needs to be reset or something?

Oct 17, 2008 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...