Question about 2007 Chevrolet Uplander

2 Answers

Continuous beeping when driving, there is a beeping as if a door is not properly closed. when not in motion but in gear, the beeping is as if in reverse and close to something

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try cleaning the gold colored contacts on the door frame. They seem to get corroded quickly in wet weather. I scrub them with an old toothbrush and some WD-40 to get the green crud off.

Posted on Dec 29, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Remove the PSD fuse from inside fuse panel

Posted on Jan 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Rear drivers side door ajar light flashes and beeps continually while driving


Hi,
have you looked @ that door's 'sensor'? There should be a button somewhere on the door , the door frame or the body that is activated when the door is opened closed.

Per this LINK the button is a part of the hinge:
Thread Door closed opened sensor

Mar 04, 2015 | 2006 BMW 325i

1 Answer

What does a beeping sound mean when a pneumatic door does not close on Mercedes Benz s320 1996


It's a warning sound to tell you that ( a door is not properly closed). It can be open any time during driving.

Mai

Mar 12, 2013 | Cars & Trucks

1 Answer

Im having the same an issue with my Kia..the dorr light comes on and makes a beeping noise while driving.. i was wondering how i could fix it. Any suggestion would be helpful. Thanks


It appears that one of the door operated switches is making contact even though the door is closed. This is indicated by the interior light coming on and the beeping noise is alerting that the vehicle has a door not closed properly when the vehicle is in motion.

It could mean the door catch is slightly out of adjustment allowing door to sit slightly away from body. Try checking each door for a loose fit by pushing the closed door in, especially the driver's which gets the most use. There should be only a little movement as the sealing rubbers are squeezed a little more. If door catches are tight then it may be that the rubber pad attached to the door that pushes on the door switch button has compressed and is allowing switch to make contact.

Sep 16, 2010 | 2003 Kia Sorento

1 Answer

Beeping noise from dash


The problem went away on its own! I took it for a 10 km drive and there was no beeping sound.

Dec 10, 2009 | 2001 Volkswagen Jetta TDI

2 Answers

Beeps while driving


My van did this aswell, you must have a power sliding door, when it is not latched properly this warning goes off but it won't say on your message center "door ajar". Stop and reopen the door and close it again no more bell. good luck.

Aug 19, 2009 | 1999 Pontiac Montana

1 Answer

Interior Lights and Door Ajar light stay w/beeping noise.


Try spraying WD-40 into the door latching mechanism (door side). I learned this fix after two battery replacements, but have only had to spray twice in the more than seven years of ownership

Jan 20, 2009 | 1998 Ford Expedition

1 Answer

1993 Honda Prelude


door is ajar in switch clean latches with pb blaster close several times should quit beeping

Jul 01, 2008 | 1993 Honda Prelude

Not finding what you are looking for?
2007 Chevrolet Uplander Logo

983 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...