Question about 1997 Honda Accord

1 Answer

Am having a problem with my car Honda1997/1998 mode V6 Audmatic.when l start the car it start moving on change to gear 2 it start firing it self for like 5sec, then after 5sec it change again and then cut again and change again for like 5sec, then l took it to my Expert for repair then he found that the TCM AIT gear position switch circuit is open and incorrect gear ratio, but the expert can not see were the TCM AIT gear circuit is. Pls could u help me point out were the problem met be or were the TCM AIT gear circuit is

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

Well if an expert told you and you trust and believe in him or her? I would go to part store and purchase that switch and then you would have a identity on it after all it is not like your going to need or use this switch.This method I suggested has been used and suggested in my past and has been to my attention effective good luck and hope this helped you out happy New Year

Posted on Dec 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1999 V6 2.5ltr Suzuki grand vitara gearbox ok until it starts to get warm and the gears get very stiff to engage.


Change clutch release system fluid first then if no change gearbox fluid fluid next if you hear squeaking noise when pushing in clutch need new release bearing

Nov 07, 2016 | Suzuki Cars & Trucks

1 Answer

What is the firing order of isuzu trooper 97 v6, where do i start from ignition coil and from engine block?gasoline because i interchange the coil cable of #6 and#3


really easy 123456 ,counter clockwise you can see it for your self at autozone library its all free and no spam, with the fan facing you first cylinder to your left is #1 first cylinder to your right is #2 it dosent matter where you start as long as you follow the firing order

Feb 26, 2015 | Isuzu Cars & Trucks

1 Answer

88 bronco 2 automatic v6 will sometimes not go in any gear but if I'm lucky it will kick in and go can anyone tell me the problem


the problem was changing that fluid! rarely happen, but it will happen when people change transmission fluid on older car then the car messed up. when you change the fluid you washed all the friction material on the clutch surface by putting in new fluid.

Jan 23, 2014 | 1988 Ford Bronco II

1 Answer

Iconverted my v6 engine to 3x with v6 gear box but it can not move very well. i mean when i select drive it can not move as usual what do i do?


This sounds rather like the No 1 or 2 shift solenoid has failed. This does happen in older V6 cars, but it should cause the O/D indicator light to blink a trouble code when the O/D switch is on.

Nov 14, 2012 | 1992 Toyota Camry V6

1 Answer

1993 shogun v6 3.0 wont start no spark, then next time it will


I have exactly the same problem could you let me know what you did to get over the Issue thanks, Mark.
07850 530730

Jan 09, 2010 | 1993 Mitsubishi 3000GT

1 Answer

Will not go into drive or any other gear


Sounds like the transmission is worn out and will need a complete rebuild. I'd guess $2-3k. Sorry.

Jun 11, 2009 | 1993 Toyota Camry V6

1 Answer

Car wont start and acts like it aint getting no gas


change fuel filter.check fuel pressure.

Apr 06, 2009 | 1991 Dodge Dynasty

1 Answer

Changeing engine lifters an cams


The firing order on your car is 1 4 2 5 3 6

Mar 06, 2009 | 1991 Acura Legend

1 Answer

I have a S-10 with 88,000 miles 4.3 V6. I went outside and truck won't start. So I sprayed starting fuild and got the truck started. But truck is back firing and running bad. Is this the timing chain or...


Timing gear, or timing belt, sometimes you find a plastic timing gear with broken teeth off of it, if you can believe that, sounds like a timing issue, sometimes you can take and move all the spark plugs wires on the distributor in a clockwise rotation, just move them around, keeping them in the same firing order, just advancing the spark without loosening the distributor, and see some improvement

Feb 24, 2009 | 2000 GMC Jimmy

Not finding what you are looking for?
1997 Honda Accord Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...