SOURCE: overheating 1989 nissan maxima also radator fan won't come on
Hi,must of the time when fans stop working is because a fuse or a fan relay is burned ,it is also posible that the fan motor also burn out,there is a temperature switch at the cilinder head that can go bad and the fan will not go on. this should do it .....
SOURCE: Clutch Linkage
I am sorry to inform you that there is no adjustment for the clutch on a 93 Mazda MX-3 in the 1.8 or 1.6 model. They are both hydraulic, which means that it keeps all the play out of it, on its own. The fluid fills up any slop at the slave cylinder. When the clutch starts to slip it is time to replace it. There is an adjustment in the pedal for free play and height, that's all.
SOURCE: 1996 nissan maxima..clutch is slipping is there an
That is an auto adjusting clutch. If it is slipping then either the adjusting mechanism is broken or your clutch is worn out and needs replaced.
SOURCE: where is the bleeder valve on 04 nissan maxima
There are 2.
One is on the side of the master, and one is located on top of the slave. Some aftermarket slaves have them on the bottom.
SOURCE: 2006 nissan maxima clutch problems
The problem is that the slave cylinder is right next to the front head of the engine-heat, heat and more heat!!! I put a piece of aluminum angle to curb the heat and installed a fan to blow right at the slave cylinder-PROBLEM SOLVED!!!
105 views
Usually answered in minutes!
×