Question about 1995 Mitsubishi Diamante

1 Answer

Mitsubishi Diamante 1995 (2.5L) harmonic balancer...

I've just purchased a Mitsubishi Diamante 1995 (2.5L) which needs a Harmonic Balancer. Have found a replacement balancer but need to remove it myself - can anyone tell me what special tool(s) I'll need to do so and does anyone know if you can drive the vehicle (until new one is fitted) whilst it has no balancer in it and if so, at what speed roughly so as not to do too much damage anywhere? Any help much appreciated - thanks.

Posted by on

  • lilchris85 Apr 02, 2009

    are the threads to the nut right hand or left handed
    and how do i keep the motor from turning over while removing the nut that holds the harmonic balancer?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

You def will not be able to drive the vehicle with no balancer due to the fact that is the main source that runs all your belts...all you should need is a harmonic balancer pulley remover..

Posted on Dec 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Autodata manuals


Timing mark/knotch is on the harmonic balancer that the pully bolts to on crankshaft.Mark said notch with a white paint pen and line it up with proper mark on tab bolted to block at the harmonic balancer.

May 09, 2014 | 2002 Mitsubishi Colt

1 Answer

The big outside pulley on the harmonic balancer fell off


The Harmonic balancer is held on to the front of the crank shaft with a bolt. there are pullys pressed onto the harmonic balancer in rubber.If more pulleys are needed for more accessories they are bolted to the harmonic balancer.

Apr 20, 2013 | Cars & Trucks

1 Answer

How do you remove harmonic balancer.timing belt broke.engine turns free cant jam balancer to get bolt off


My research shows that you need 2 special tools. I couldn't find a picture of them but I have the tool #'s:
SST MB990767-01 and MD998754,

Oct 28, 2011 | 2002 Mitsubishi Diamante

1 Answer

I need the location of the harmonic balancer on my 2.2l Ecotec engine. Car is 2004 Chevrolet Cavalier LS.


CRANKSHAFT PULLEY IS THE HARMONIC BALANCER.YOU NEED THESE TOOLS TO REMOVE HARMONIC BALANCER, YOU NEED HARMONIC BALANCER REMOVER AND INSTALLER TOOL.YOU NEED A LARGE PIN SPANNER WRENCH TO HOLD HARMONIC BALANCER IN PLACE WHILE LOOSEN THE HARMONIC BALANCER BOLT.

May 21, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

How do i remove harmonic balancer & replace


YOU NEED A HARMONIC BALANCER PULLER TOOL AND A 15M SIX POINT SOCKET TO REMOVE HARMONIC BALANCER BOLT.TURN OFF RADIO AND REMOVE THE DRIVE BELT AND REMOVE THE NEGATIVE BATTERY CABLE. REMOVE THE STARTER SO YOU CAN PUT A LARGE SCREW DRIVER OR LARGE PUNCH TO STICK IN ONE OF THE FLY WHEEL HOLES TO KEEP ENGINE FROM TURNING WHEN YOU LOOSEN THE HARMONIC BALANCE BOLT. ALSO SCREW DRIVER AND PUNCH CAN KEEP ENGINE FROM TURNING WHEN REMOVER THE HARMONIC BALANCER. YOU WILL NEED A HELPER TO HOLD PUNCH OR SCREW DRIVER WHILE YOU LOOSEN THE BOLT. YOU CAN GO TO SEARS OR ANY AUTO PARTS STORE AND BUY HARMONIC BALANCER PULLER.TORQUE HARMONIC BALANCER BOLT TO 76 FT LBS.

Apr 23, 2011 | 2003 Pontiac Montana

1 Answer

Need to pull the harmonic balancer,do i need a puller? and what kind do i need?


In order to remove your harmonic balancer, you will need a harmonic balancer puller. Most harmonic balancer pullers work and look the same. For your specific car it doesn't need a specific one. You can go and pick one up at your local auto parts store. You can either buy it or rent it, depending where you go. Hope this helps.

Aug 27, 2010 | 1997 Mitsubishi Montero Sport

1 Answer

Replace harmonic balancer 1996 mitsubishi 3000gt


mcdevito75 here, You"ll need speciall tools for this job, let your local shop do the job.

Jun 16, 2010 | 1996 Mitsubishi 3000GT

1 Answer

Harmonic balancer


please explain what you mean by harmonic balancer ?? do you mean the air filter

Jan 02, 2010 | 1996 Mitsubishi Eclipse

1 Answer

No treads on harmonic balancer. Should there be treads on the harmonic balancer because my serpentine belt came off and upon reinstalation properly I found that the belt had treads on the serpentine belt,...


the pulley on the crankshaft should have grooves in it for the belt, otherwise the belt will not turn. is the pulley broken off, get back to me. there are NO technical servise bulletins on this item,if you need more help get back to me, Thanks Ray

Dec 10, 2009 | 2001 Oldsmobile Aurora

2 Answers

Harmonic balancer


what are the steps to removing a harmonic balancers

Oct 18, 2008 | 1997 Chevrolet Corvette

Not finding what you are looking for?
1995 Mitsubishi Diamante Logo

Related Topics:

372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...