Question about 2004 Ford F150

1 Answer

Switch turned to 4-wheel high or low and nothing happens, truck is F 150 2005 model

Posted by on

  • FordTuff3 Dec 16, 2008

    I have the same problem with my 2004 F150 - I turn the switch, but nothing happens. 4 wheel drive won't engage in high or low.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have A 04 F150 FX4 and I had A problem with mine while under warranty and it turned out to be the Shifting module. Thought this might give you something to check.

Posted on Dec 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1995 GMC Jimmy won't let me switch into four wheel drive. I had in this morning in 4 wheel low, but when I went to put it into high nothing. Now it feels like the button is stuck, none of the lights...


there is a "modulator " on the transfer case with a 3-4 pin plug that fails often.this may be defective as well as the relay component that turns it on(rwhich is located under the battery)...try cheching/changing these first....the "modulator" is about 30 bucks and the relay is about the same

Dec 16, 2010 | GMC Blazer Cars & Trucks

1 Answer

Will not go in 4 low 4x4 lights start blinking after trying . reset light by unhooking battery . then goes in 4 high normelly but not 4 low. i thlnk auto 4 is working 4 liter SOHC 1998


Normally 4 wheel drive HIGH is engaged on the fly or as you are moving more than 10 km per hour or 10 miles per hour but 4 wheel drive LOW is engaged at around 3 to 5 mph. no more or you could ruin the transfer case. Try going from 2 high to 4 high by switching back and forth and then try 2 high to 4 low when idling along. What usually happens is the mechanics under the car freeze up or rust up and you have to switch back and forth to free it up.

Nov 01, 2010 | 1998 Ford Explorer

1 Answer

Push the 4 wheel drive switch into 4 high and


check the wires on switch it may be loose or disconnected...

Dec 10, 2009 | 1999 Chevrolet Blazer

1 Answer

4 wheel drive will not engage (1995 S10 Blazer)


I had this same problem a few years ago. In my case I didn't use the 4 Wheel Drive very often and the tranfer would hang in 2 Wheel. I fixed mine by tapping on the transfer case with a hammer while my wife switched back and forth from 2 Wheel to 4 Wheel.

Jun 14, 2009 | 1994 Chevrolet S-10

1 Answer

I put my 2000 escalade in 4 wheel low last night; and now I cannot get it switched back to 2 wheel high. I will not go above 50 miles an hour when I drive it. When I press the 2 wheel high button it...


start truck leave in park press 2 wheel high button put truck in drive move truck,check for being in 2 wheel high, if still in 4 wheel low have switch and shift solenoid checked

May 17, 2009 | 2007 Cadillac Escalade Two-Wheel Drive

1 Answer

2000 F350 Super Duty Will not go into 4 wheel drive


I have recently had this problem with a customer. It seems the 4x4 low will only engage in neutral with the brake applied. And also check fuse. Then select drive and you will feel it lock in. Don't "goose" the fuel when attempting this.

Jan 13, 2009 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

Low range 4x4


4x4 low function will only engage when vehicle is stopped in neutral with foot on brake. try that

Dec 10, 2008 | 1993 Ford Explorer Limited

1 Answer

4-wheel high problem


reset the 4x4 computer by pulling out the courtesy lamp fuse and the ATC fuse for 1 minute then reinstall both fuses then cycle the key on and off 5 times. if this works please rate.

Nov 17, 2008 | 1998 Chevrolet Blazer

Not finding what you are looking for?
2004 Ford F150 Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...