Question about 1995 Acura Integra Coupe

1 Answer

I am looking for instructions on how to remove the face plate of the air controls of my 1995 Integra, I need to see if the cable to the control has been disconnected.

Posted by on

  • yadayada
    yadayada May 11, 2010

    try joining alldata.com

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Hook your fangers in the side of the panel and pool hard.you can also use a flathead scrudriver

Posted on Feb 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove the stock radio from my 1993 geo metro 4 door hatchback


here is the online fsm quote

  1. Disconnect the negative battery cable.
  2. Open the glove box. Remove the glove box open panel.
  3. Remove the air conditioning switch connector and heater control unit lever knobs. Pull heater control unit cover plate from instrument panel.
  4. Remove the gearshift control lever upper boot and center console.
  5. Remove the ashtray.
  6. Remove the instrument panel center trim bezel and radio face plate.
  7. Remove the screw from the back of the radio receiver and the screws from the front face of the radio.
  8. Remove the radio.

Sep 30, 2014 | 1993 Geo Metro

1 Answer

Throttle going wide open in 1st gear and staying there for about 5 sec


sound like throttle cable could be binding the cable clip broken or missing or throttle body linkage and plate has carbon build up.throttle body need taken off remove all plastic parts and rubber parts remove all electrical parts like idle air control valve and remove tps sensor the carburetor cleaner will destroy.clean throttle plate and throttle shift linkages spray clean real good remove all carbon build up.

Jun 21, 2013 | 1995 Toyota Camry

1 Answer

3.8L BUICK REGAL IDLE WONT KICK DOWN IN PARK OR IN GEAR CHECKED VACCUM LINES & INTAKE GASKET 4 LEAKS ALL LOOKS GOOD ANY SUGGESSTIONS


If you know for a fact you have no vac leaks, the next step would be to check the idle air control valve. It should be mounted in the throttle body. It could be stuck open.
The computer controls idle speed by regulating air flow into the throttle body.
The throttle plate could also be stuck open. An eighth of an inch would do it. Make sure the throttle and cruise control cables are not pulling on the throttle plate.
Vac leaks could include the PCV valve and the EGR valve.

Jan 12, 2013 | 1995 Buick Regal

1 Answer

I needed to replace climate control unit on1997 Grand Am GT. Concerned with how to remove the cluster face panel w/o breaking it.


Let me know if this helps out.

Heater & Air Conditioning
  1. Disconnect the negative battery cable.
  2. Remove the screws securing the cluster trim plate to the instrument panel.
  3. Tilt the top of the cluster trim plate downward releasing the clips that mount the bottom of the trim plate to the dash. Remove the trim plate.
  4. Remove the screws attaching the accessory trim center plate to the dash.
  5. Tilt the top of accessory trim plate downward releasing the clips that mount the bottom of the plate to the instrument panel. Remove the plate.
  6. Remove the screws attaching the control assembly to the dash.
  7. Remove the control assembly from the dash.
  8. Disconnect the control assembly electrical connectors.
  9. Remove the control assembly.

To install:

  1. Install the control assembly.
  2. Connect the control assembly electrical connectors.
  3. Install the control assembly attaching screws.
  4. Push the mounting clips into place and roll the top of the accessory trim plate upward into position.
  5. Install the screws attaching the accessory trim plate to the dash.
  6. Push the mounting clips into place and roll the top of the cluster trim plate upward into position.
  7. Install the screws attaching the cluster trim plate to the instrument panel.
  8. Connect the negative battery cable.
// // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 40; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos';

Jan 23, 2011 | Pontiac Grand Am Cars & Trucks

1 Answer

Where is the A/C compressor RELAY located on my 1995 Acura integra LS ?


The fuses in an Acura Integra are located under the dashboard on the driver's side. The under hood relay panel, which is the one that controls the air conditioning, is found on the right of the engine compartment next to the battery. Replace it with only another 10-amp fuse to avoid damaging the electrical system.

Nov 28, 2010 | 1995 Acura Integra Coupe

1 Answer

Looking for where the heater cord is located?


To remove and installing the Heater Core, check this procedure...
  1. Disconnect and plug the heater hoses at the firewall.
  2. Disconnect the heater valve control cable.
  3. Remove the heater unit attaching nut on the firewall.
  4. Remove the dashboard as follows:
    1. Remove the center panel.
    2. Disconnect the wire connectors at the fuse box.
    3. Disconnect the sunroof switch connector, if equipped.
    4. Disconnect the ground cable at the right of the steering column and the power mirror switch wire connector.
    5. Remove the side air vent knob and face plate.
    6. Remove the screws attaching the air vent control lever.
    7. Remove the center panel, radio and heater control head.
    8. Remove the gauge upper panel (4-door) or instrument panel (3-door).
    9. Disconnect the speedometer cable.
    10. Remove the center upper lid.
    11. Remove the side defroster garnishes on both ends of the dash.
    12. Lower the steering column.
    13. Remove the dashboard mounting bolts.
    14. Lift and remove the dashboard assembly.
1. Remove the heater duct.

zjlimited_113.jpg

Fig. 1: Removing the heater duct assembly

  1. Remove the steering column bracket and duct assembly.
  2. Remove the heater assembly mounting bolts.
  3. Remove the heater assembly and remove the heater core.
zjlimited_114.jpg

Fig. 2: Removing the heater case assembly

zjlimited_115.jpg

Fig. 3: Removing the heater core from the heater case


Hope this helps (remember to rate this answer).

Nov 23, 2010 | 1992 Honda Civic

1 Answer

2001 acura integra coupe won't start. already replaced the ecu, the battery is good....don't know what else it could be other than the started? any suggestions?


Ck the maf sensor. First sensor in duct leacving air cleaner. It controls fuel.
chk the crank sensor above cranksgaft fron pulley It controls the spark and timong.
Listen for your fuel pump running with key on. Mounted in the fuel tank.
Good luck

Jun 11, 2009 | 1995 Acura Integra Coupe

1 Answer

How do I remove the dash?


hi,

Remove the control knobs, remove the face plate, there are a couple of screws that you need to remove, then you will have to disconnect the control cables on the heater and the air duct controls, they are located under the glove compartment and on the left side under the dash next to the accelerator pedal on the heater duct housing, after all the cables are disconnected you can pull the control assembly out and then replace the fan control switch, I almost forgot, it makes things a lot easier if you remove the radio, the radio cover, and the glove compartment.

Thanks

fame !

May 04, 2009 | 1995 Toyota 4Runner

2 Answers

How to replace heater core 93 honda del sol


Heater Core Honda Civic/CRX/del Sol 1984-1995 Repair Guide REMOVAL&INSTALLATION
See Figures 1, 2 and 3
REMOVAL & INSTALLATION
  1. Disconnect the negative battery cable and disable the SRS system (if equipped.)
WARNING All SRS wire harnesses are covered with a yellow insulation. Read the SRS precautions found in this section and install the short connectors as described.
  1. Properly drain the cooling system.
  2. Disconnect and plug the heater hoses at the firewall.
  3. Disconnect the heater valve control cable.
  4. Remove the heater unit attaching nut on the firewall.
  5. Remove the dashboard as follows:
    1. Remove the center panel.
    2. Disconnect the wire connectors at the fuse box.
    3. Disconnect the sunroof switch connector, if equipped.
    4. Disconnect the ground cable at the right of the steering column and the power mirror switch wire connector.
    5. Remove the side air vent knob and face plate.
    6. Remove the screws attaching the air vent control lever.
    7. Remove the center panel, radio and heater control head.
    8. Remove the gauge upper panel (4-door) or instrument panel (3-door).
    9. Disconnect the speedometer cable.
    10. Remove the center upper lid.
    11. Remove the side defroster garnishes on both ends of the dash.
    12. Lower the steering column.
    13. Remove the dashboard mounting bolts.
    14. Lift and remove the dashboard assembly.
  6. Remove the heater duct.
0900c15280061a21.jpgFig. 1: Removing the heater duct assembly
  1. Remove the steering column bracket and duct assembly.
  2. Remove the heater assembly mounting bolts.
  3. Remove the heater assembly and remove the heater core.
0900c15280061a22.jpgFig. 2: Removing the heater case assembly 0900c15280061a23.jpgFig. 3: Removing the heater core from the heater caseTo install:
  1. Install the heater core into the heater unit.
  2. Install the heater assembly and the attaching bolts.
  3. Install the heater duct and steering column bracket.
  4. Install the dashboard assembly. Tighten the mounting bolts until just snug.
  5. Raise and attach the steering column.
  6. Install the center upper panel.
  7. Connect the speedometer cable and install the instrument gauge assembly.
  8. Install the control head, radio and center panel.
  9. Install the side vent and face plate.
  10. Connect the ground cable at the right of the steering column and the power mirror switch wire connector.
  11. Connect the sunroof switch connector, if equipped.
  12. Connect wire connectors at fuse panel.
  13. Install the heater unit attaching nut on the firewall.
  14. Connect the heater valve control cable.
  15. Connect the heater hoses at the firewall.
  16. Connect the negative battery cable.
  17. Fill, bleed and leak check the cooling system.

Sep 01, 2008 | 1996 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...