Question about 1995 Lincoln Town Car

1 Answer

Need a manual with a good schematic

I have a 1995 Town Car with light front end damage. Grill, headlight assembly, bumper, hood, etc. I have a Chiltons, but it is worthless as far as putting this front end back together. At this point I am just trying to figure out what parts I need and I would like to see a schematic so I can save myself from making 10 trips to the junk yard or ordering on-line and waiting. Anyone know of a good resource?

Posted by on

  • tbuck1000 Dec 09, 2008

    Thanks. Does anyone have a Haynes and can verify that they cover body parts? I usually find Chiltons to be more thorough, but I also know that it seems to vary greatly by car company.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

Try A Haynes manual Form Autozone/PepBoys or Haynes online. Good Luck

Posted on Dec 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram and parts list


Call your local Chevy dealer, the parts dept. should be able to help you with diagrams, parts numbers , price and availability.

Feb 01, 2014 | Chevrolet Cars & Trucks

1 Answer

How to replace nissan murano 2011 front driver side turn light


Lift hood, remove grill plastic screws on top, jack car left hand side, remove corner screw on end of bumper, undo lower splash shield screws, slide bumper away from car {about 4 inches}, remove,top bolts on headlight and lift out, the is a locating slot that you will need to manipulate it from, assembly is the reversal. good luck.

Oct 20, 2013 | 2007 Nissan Murano SE

1 Answer

2003 escalade how to remove front bumper.


I just took this one on today. You'll need a flat head screw driver (a clip puller if you have one) a 15mm socket with a 10" extension and 10mm socket. Pop the hood, remove the plastic guard over the radiator and grill. Remove the 10mm bolt in the center of the grill. Remove the grill by popping the clips off each side then the grill will remove by pulling up. Remove the headlights by removing the two pins, one on top one on the inside of the lamp assembly. Remove 4, 15mm bolts from the top side of the bumper (2 upper, 2 lower that require the extension). From underneath the vehicle remove 2 more 15mm bolts (one from each side). The bolts are located just outside of the fog light assembly and sit horizontally. The bumper is now ready to be uncliped. From the inside of the wheel well use a Flathead screw driver to push in the clip while pulling the bumper away from the mounts. I used a large floor mat to keep the bumper from hitting the ground directly. It's helpful to have a second person to help on the last step.
Good Luck!

Aug 16, 2010 | 2004 Cadillac Escalade

1 Answer

What parts are needed for replacing the front end of a 2001 monte carlo? I find bumper covers, reinforcements, energy absorbers, etc. Do I need some or all of these?


It depends on how far in the damage goes. Usually fenders, hood, bumper cover and headlights, but if the damage is deep, you could need a bumper, absorbers, the bumper mounts, even the radiator support assembly, which requires welding.

Pull off the damaged parts and set them aside, and then go to gmpartsdirect.com and click on the catalog link, fill in your make and model and look for the bodyparts you need to replace.

Apr 04, 2010 | 2001 Chevrolet Monte Carlo

1 Answer

VW SHARAN 02. i need to remove the headlights so i can straighten the cap covering the bulb and also the light tilter is not working ( the switch does not seem to tilt the beams when i turn the dial, this...


  1. In order to remove the headlights, you need to remove the front bumper cover.
  2. Place the front of the car on jack stands.
  3. You will need to remove the screws on each side in the fender wells on the back side that screw into the bumper. these are torx screw head type.
  4. On the underside of the car there are larger torx type screws that attach the bumper cover to the body. They need to be removed.
  5. You will need to remove the grill that has the VW symbol on it. Under the grill there is more torx type screws to remove. Inorder to remove the grill you need to get the hood release rod off as well.
  6. With the bumper cover removed, there are four torx type screws holding the headlight in place. Once removed you can unplug them and the head light is off.

Jan 25, 2010 | 2002 Volkswagen Jetta TDI

3 Answers

Headlight


Well according to my mitchell manuel you don't have to.here is the procedure.
1. open the hood.
2.Remove the push-pin retainer's that secure the top of the upper facia and grill assembly to the upper tie bar to allow the upper facia and grill assembly to flex forward.
3. remove ther bolt and push-pin retainer that secures the top of the headlight assembly to the upper tie bar.
4. Gently pull the upper facia and grill assembly forward to access the bolt on the inboard side of the headlight assembly
5. Pull the headlamp assembly straight out to disengage the the snap in retainer at the lower outboard back surface of the assembly. Turn the assembly so that the inboard assembly clears the front facia.
6. pull the assembly out and away from the veh.From there you'll be able to access bulbs.
be careful not to touch the bulb with fingers or oil in skin will blow bulb.
Good luck.

Aug 19, 2009 | 2004 Cadillac SRX

1 Answer

Damaged headlight assembly


Its Easy Their are retainers on the top of bumper as well as bottom and bolts on each side at fenders as soon as you get the bumper off you will be able to change head lights and all then jus go back words to put back on

Jan 23, 2009 | 1998 Buick Century

2 Answers

How to change the whole headlight assembly on a 05 Honda CRV


You have to remove the front bumper and grill etc

There are 5 bolts holding the headlight assembly in place. 2 at the top and 3 underneath.

Remove the plastic cross piece by prising out the clips and then the grille clips too then unbolt the bolts eithr side under the wheel arch. The bumper is still fastened using cips. Pull the bumper forward to unclip.

Dec 23, 2008 | 2005 Honda CR-V

1 Answer

How to replace headllight lamp


I know your frustration! I cannot believe the complexity of changing the headlights. Chevy has tried to make this a dealer item only just to change a headlight bulb. I will try to explain the procedure unfortunately I do not have photos. First you will need to remove the wheel well liner (two bolts and two plastic push pins). Pull the wheel well housing back (you will need to turn the wheel/tire to gain access) and using a 7mm socket remove the plastic support piece that holds the bumper in place (two bolts). Pull the corner of the bumper down until you can locate the bottom bracket of the headlight assembly that is held by a 10mm bolt. Remove it. (Oh did I mention this is a two person job!) Next move to the front of the vehicle (hood up) and remove all the 10mm bolts holding the upper part of the grill (I think there are eight of them). Now remove the obvious top two bolts on the headlight assembly! With two people - one to work the headlight assembly and one to push down the bumper and pull out on the grill assemble, slowly and carefully pull the headlight assembly straight forward. You will need to be mindfully of the small tabs on the headlight assembly that like to get caught on bumper/grill. If you are just replacing the bulb, you should be able to move the headlight assemble far enough forward to gain access to the bulbs without totally removing the headlight assembly. What a ***** job! SHAME on GM.

Oct 11, 2008 | 2008 Chevrolet Suburban

1 Answer

Vehicle accident


follow your nose,you will find them on the car somewhere,and next time keep a safe distance

Oct 09, 2008 | 1992 Lincoln Town Car

Not finding what you are looking for?
1995 Lincoln Town Car Logo

Related Topics:

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...