I have a light coming on right beside of the abs light.what does this mean. it looks like this. ((!))

It means there is a problem with the ABS system, most likely a bad wheel bearing. Have car scanned for codes. It should lead you in the right direction

hello, this code usually comes up in conjunction with another code, it just means that another computer on the car can not communicate with the ECM, are there any other codes besides this, is the abs/VSC, TRac cruise control or 4x4 lights on?

pulsates ARE normal for this truck it means abs is working.
if truck pulls to the right then the LEFT brake caliber is not working right check to see if rusted up... also install NEW calb. BOLTS never reuse old one if one is bent calb. wont slide correctly

Nothing. You will just be operating a vehicle with conventional hydraulic brakes, san abs and traction contol. There are many other things that can cancel your abs, and turn on the light besides a faulty sensor, although a sensor, or sensor wiring are by far the most common causes.Is your red brake light on also? If it is, this indicates a dangerous hydralic fault that will also turn on the abs light, but absolutely must be addressed for your safety. (and everyone else's) Good luck, and contact me with any ore questions!

might be an engine light. if the car is running normal its probably a ******** code like massive leak in the evap system that really doesn't mean anything other than you will fail a e check

this sounds like the Traction/Stability control and ABS warning lights, they are art of the same system and come on together.

it means that you are having a malfunction with the abs system on your brakes....id have that checked immediately by a certified mechanic

Hi my name is Allen!

If the ABS light comes on this means there is a problem some where in the system. Go to AutoZone and have them pull the code for you, right down the code number and what it means and I will assist you in repairing the problem.

For further assistance contact me at FixYa!

have autozone scan it for free could be multiple things wrong wheel speed sensors to abs pump does it come right on after starting? or do you have to drive it???

When the ABS, VSC & Trac Off lights all come on, this means that you have a problem in the ABS system. Without a proper DTC code, I cannot really isolate the situation, but, the first place that I would look at is the wiring and the connectors going from the wire harness to each of the 4 wheel speed sensors. Any break or fraying at these wires, or corrosion in the connector WILL make those 3 lights come on. If you can, get the ABS system scanned with a scan too, and record the codes, and then get back to me for a more concise solution.