- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is a screw in the plastic towards the front end of the overhead console towards the windshield,remove that.Then use a trim tool or a flat screwdriver and gently pry down the console from the back end.Your all set, change the bulbs and put it back together.
Had same problem wit my 4 disk. A CD was jammed. Remove and open the unit up and remove the CD. The mechinizem might be jammed also. Try this before replacing. Seems like a common issue with these units. The newer 300Ms came with 6 disk changers.. not sure if these will work with the existing radio.
check for 12 volts at starter from battery, and make sure power and grounds are on well, remove starter and take to auto zone to test for free, then buy a chiltons if that doesnt work and trouble shoot it from the no start category, could be other sensors.