An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.
Re: Seats (grey/leather) -1995 900 Turbo SE
Neoprene two tone seat covers are available at State of Nine but are pricey. You can spend about $250 and perform a DIY leather repair and dye job to the entire interior. Here is what I did, using leather cream crack filler and auto leather dye. It lasts about three years and then requires touching up.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I AM NOT GOOD WITH UPHOLSTERY BUT I BUY ON EBAY ONCE IN A WHILE AND I FOUND A GOOD UPHOLSTERY GUY THAT YOU CAN GET THIS SEAT OR JUST THE BOTTOM FROM IF YOU NEED IT .. I HAD HIM DO ME ONE FOR MY LEATHER SUBURBAN AND WOW ITS NICE AND I PUT IT ON EASILY THE HARD PART WAS TAKING THE SEAT OUT THEN FOUND OUT IT WAS A SNAP TO PUT ON .. THE GUYS NAME ON EBAY IS upholsteryguys IF YOU NEED ANY HELP WITH THIS LET ME KNOW YOU WILL BE IMPRESSED WITH HIS WORK.. AS FAR AS THE HEATED SEATS AND THE LUMBAR GOES YOU MIGHT FIND THE PROBLEM WHEN YOU GET IT APPART PUTTING ON THE COVERS .. USUALLY THEY GET BAD CONNECTIONS AFTER A WHILE.. THANKS JERRY AND HOLLER IF YOU NEED MORE.
Hello, Have you tried pulling the belt outside the car and pressure washing it, then dry before releasing them back into the reel. Please press the blue button to appraise my FREE! Effort. Thank You! Paul 'W' U.K.
I had this problem, but only on the driver's side (with leather seats). Sometimes the switch would come on, but I could not get it to go back off (and the seat would not heat).
I ended up removing the drivers front seat cover (only the bottom part), folding it back from the driver's door to the middle of the car. You also have to unplug the wiring harness underneath the seat. I found a black spot burned in the foam. This is where a wire had broken. I carefully pulled the wire together, then soldered it. I put everything back together, and it has been working ever since (about 6 months - and getting lots of use in the middle of the winter).
I think the only way to replace the heated seat wires is to replace the whole seat cover. I was glad I could fix mine by soldering it.
i have a saab 900 se conv that i am going to do the same thing. i think im just going to go with the same color, and same patterns of the old seats. i will just add some ripples, new heated seat elements, and speakers. and also i am going to look into adding vents with fans for cooling.