2003 yukon passenger door switch removal

2003 GMC Yukon XL

For better result of your problem contact the reliable-store they have the best service manuals :))

Your solution is a front passenger door module (FPDM),before you replace it check for open fuse in the engine junction fuse box,I dont know the fuse number but it is a 25 amp fuse.

I've heard it can be done with some difficulty. It may help to unbolt the passenger seat and move it as far over as possible to get to door panel screws and fasteners. Take all the screws out and pop the bottom retainers out. Good luck. Let us know if it was possible.

With numerous shop visits,I don't like
to even suggest anything --BUT --

I would be almost certain, that the fuel pump
is worn & binding up & the shops, as strange &
sad as it sounds,do not know how to test it

03 denalis do not have one, Gm discontinued them in 03,

Take it apart again you probably didn't lock connectors tight or pinched a wire or something silly.
Go at it again slowly you'll find it.

you need a tool that goes in a slot in the rear bunper

There is a screw behind the lock rod. Lift door panel straight up to remove

yes it does sound like that is your problem. try checking for used one.

First unscrew all the screw on the door then remove interior panels gently with screw driver and open the protective plastic film then remove all the wirings from the car and then remove the bolt from the car body and fit new door and make the wiring should be plug to car door as earlier...................