Question about Dodge Pickup

3 Answers

I have a 1998 Dodge 1500 why does the heater/ac blower motor only work on high, do I need to replace the motor?

Posted by on

  • raymond_pill Jan 16, 2009

    the fan works only on high

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 67 Answers

The motor is fine, the blower resistor is the most likely cause. All fan speeds except high go through the resistor.

Posted on Dec 08, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 96 Answers

My fan mortor works when it wants to and i put a new restor in now what it is in a 1997 dodge dakota

Posted on Dec 06, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 203 Answers

Could be the switch itself thats worn out try a junk yard for a replacement it should only cost a few $`s . joe

Posted on Dec 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the heater resistor on a 2005 dodge dakota? Behind glove box?


should be just above the blower motor. You will need to remove the glove box door to gain access.

Dec 12, 2015 | 2005 Dodge Dakota Club

1 Answer

2001 dodge ram 1500 4x4 sport 5.9 l heater and ac fan works on high only whats the fix


Very common. The blower motor resistor is burned out. The part is about $25 and you can replace it yourself 3 zone will cost 75 bucks and is behind the glove compartment..2 screws and 2 wire disconnects and your done.

Oct 15, 2011 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Low and medium speed fan for ac does not come on, while high speed fan works. 2000 1500 dodge van, had new condensor unit under dash replaced recently.


Blower motor resistor needs replacing. Follow wires from blower motor to connector, which should be the resistor. Usually in duct work, held in by 2 small screws.

Jul 25, 2011 | 2000 Dodge Ram 1500 Truck

1 Answer

My 1998 Jeep Wrangler Heater Motor only has one speed High. Nothing on any of the lower ones, no matter on ac or heat. What could be the problem?


This is 100% the Blower (Fan) Motor Resistor located near the Blower Motor.
This is a very common problem with Chyrsler, Dodge, Jeep and Plymouth. The key symptom is the Fan only working on High.
This is very easy to access and replace.

Let me know if this helped....

May 13, 2010 | 1999 Jeep Wrangler

1 Answer

My blower motor runs on high


the position switch is bad replace it

Aug 20, 2009 | 2004 Dodge Ram 1500

3 Answers

Blower speeds on ac/heater for 2003 chevy pickup(v6)


Hi, sounds like your blower motor resistor needs to be replaced. If not the resistor, check the blower motor.

Jul 27, 2009 | 2008 Dodge Ram Pickup 1500

1 Answer

Heat blower only works on high speed


replace fan speed reostat,generally high spd. does not go thru the reostat-full 12v service..kev-mn.

Dec 10, 2008 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...