Question about 2003 Pontiac Montana

1 Answer

Turn signal I have turn signal problems on both sides. On the passenger side the bulb doesn't come on at all (new bulb), ever. On the driver's side the bulb (new) doesn't flash when the headlights are off. If the headlights are on, the bulb comes on, then flashes if I signal.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Go to your local NAPA auto parts store and get replacement tail lights circuit boards. This should solve the problem. I did for my daughters van.

Posted on Jan 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passenger side front turn signal/DRL do not work.


Dear Alex,
The problem is in the bulb, or the socket, or the wiring to these.
Whenever a turn signal flashes fast, know that one of the bulbs is not working.
You have already identified the problem as being the front one. Problem could be the hot wire, or the ground wire, or the ground connection to this bulb.
Start by taking a tester to the hot wire, and see if it is receiving electrical impulses when the turn signal is on.
( It probably is, unless the car has been in a wreck and has been improperly repaired.)
Then check the socket or the wires to is and see if the bulb is grounded.
I suspect the ground is defective, and either a new socket or a repair to the ground wire should fix you rights up.
God bless your efforts.

Aug 02, 2016 | 2002 Pontiac Montana

1 Answer

Drivers side tail light not working


Put the passenger bulb in the drivers side and see what happens, if it works buy a new bulb.

Oct 19, 2014 | Cars & Trucks

1 Answer

Turn signal bulb was working, now it isnt


its is not uncommon for the contacts in the sockets to become corroded or just expand to the point of where they do not contact the bulb,try to test the socket with a multimeter for voltage,if it has voltage then its most likely the contacts,which sometimes can be rebent,but replaceing the sockets is a better solution,and can be picked up at most stores or 4x4 shops and junk yards.

Dec 14, 2011 | 1998 Jeep Cherokee

1 Answer

Front driver's side signal light does not work. Changed the bulb and it still does not work. The driver's side rear works and the passenger side works (front and back). Also, when the signal arm is pushed...


when a bulb fails on one side of the indicators the other bulb, same side, flashes faster, SO.you have just answered the question yourself,as you have replaced the bulb with a new one, the contacts for the new bulb are at fault.

Sep 11, 2010 | Hummer H3 Cars & Trucks

1 Answer

Driver front turn signal does not blink. front


This may have more then one bulb in the front or possibly a bad socket try wiggling the new bulb in the socket to see if it will work.Compare all turn signal lights that come on the passenger side to those drivers side.Some vehicles also incorporate sidemarker lights with the turn signals.

May 29, 2010 | 2001 Pontiac Aztek

2 Answers

Tail lights work on both sides. turn signal and


Sounds like you need to replace the drivers brake/tail light.

Dec 14, 2009 | 1998 GMC Sierra

2 Answers

2002 Hyundai elantra driver side turn signal not working outside


This simply means that the front driver side turn signal bulb has failed. Replace it.

Oct 28, 2009 | 2000 Nissan Maxima

Not finding what you are looking for?
2003 Pontiac Montana Logo

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...