My wife has a 97 town and country. For about 2 weeks the instrument panel
was going out then coming back on. A couple days ago it got bad. The van would start and run only several seconds then the engine would shut down.
I took the Instrument panel out and it started and stayed running. I pulled the
PC board found the bad Soder connections and resodered them. Problem
was gone and the P1698 code erased. Best thing is it did not cost me anything and the van is fixed !
SOURCE: fuse for stereo/cd in chrysler town and country minivan
Its in the box next to the battery and i had the same problem.The fuse is on the first line top.
Thanks
SOURCE: 2003 Chrysler Town & Country will not start.
The code p1684 only states the battery has been disconnected within the last fifty starts. If the code set before you disconnecet the the battery you may have a bad ASD relay. ASD relay supplies all the power. If it stops working you may have a voltage drop or no voltage at all. Its located in the fuse block in the engine compartment. Chryslers are funny. When you have a voltage issue you may experience things clicking on and off
SOURCE: Describe your 2006 Chrysler Town
P0404 IS EGR POSITION SENSOR PERFORMANCE..YOU NEED A NEW EGR VALVE..RECOMMEND DISCONNECTING BATTERY WHILE REPLACING EGR VALVE..SOMETIMES CODE WILL NOT GO AWAY EVEN AFTER REPLACING VALVE AND CLEARING CODE WITH SCANNER..VALVE IS LOCATED ABOVE ALTERNATOR ON END OF CYLINDER HEAD..THE BOTTOM BOLT CAN BE TRICKY TO REMOVE AND HAVE HAD TO REMOVE ALTERNATOR TO GET BOLT OUT..YOU WILL NEED A NEW GASKET FOR TUBE AS WELL..ABOUT 120 BUCKS FROM DEALER(CAN)
SOURCE: Chrysler trouble code U110C on 2005 chrysler town
encrypted software ,dealer only----yes i know you are showing a reading but it doesnt mean anything or if it does it shows a different code .so your snap on or mac tools scanner is a waste of time and money.Nearly all new motors from 2005 are using encrypted software to stop general mechanics like me from working
SOURCE: code p1698 town & country 96
p1698 code=No CCD message from TCM or No Transmission Bus Messages
It means the person's computer could not connect with yours.it's possible it was his problem if your not having any issues
683 views
Usually answered in minutes!
×